tick....tick....tick....
- Thread starter Boosted92LX
- Start date
opcorn:
AS ALWAYS!
- Jul 21, 2005
- 2,169
- 145
- 155
- Dec 19, 2010
- 5,720
- 4,243
- 224
Just got home with my *FREE* five lug conversion w/ rear disc... I was under the impression that it was SN95 stuff, but it turns out it's 87-88 lincoln lsc...but again, FREE being the key word here. It was actually an old ford racing kit that sourced lincoln parts I'm told....If the front brakes aren't large enough, I can always upgrade them later...but five lug with rear disc
Did I mention FREE??? Also with it I scored a booster I was told came from a 93 cobra.... I know I need to add a proportioning valve, but will my master cyl. for the drum rears work? I was told something about a check valve that's different between the two that won't interchange in the master cyl. Any body?
Did I mention FREE??? Also with it I scored a booster I was told came from a 93 cobra.... I know I need to add a proportioning valve, but will my master cyl. for the drum rears work? I was told something about a check valve that's different between the two that won't interchange in the master cyl. Any body?
Shaolin Crane
Banned
Normally, but thats wire reinforced glass and there are bars outside. Or yes, i wouldnt place them there
- Dec 19, 2010
- 5,720
- 4,243
- 224
Then your experience sucks, i dont think 16 lifters could fit in a box small enough to house rod bearings
Rest assured its all stuff for an lsx swap
My experience doesn't suck.....
- Dec 19, 2010
- 5,720
- 4,243
- 224
Get all that sucking outta my thread! *shoos them out with broom* go on!! go play that outside!!
- Dec 19, 2010
- 5,720
- 4,243
- 224
FordRacing302
5 Year Member
- Dec 19, 2010
- 5,720
- 4,243
- 224
Come on fellas, joking is one thing, but geez! I don't wanna see y'all get banned.....be like little fonzies.....
- Dec 19, 2010
- 5,720
- 4,243
- 224
FordRacing302
5 Year Member
- Dec 19, 2010
- 5,720
- 4,243
- 224
My buddy I got the kit from said that he'd read or heard that when you release the brake, there is a check valve somewhere that maintains 5 psi on the line with drums, and around 2psi with disc to keep them snug against the drum/rotor for reaction time when when you apply pedal again...And he thought it was in the M.C., but maybe just in the prop block...
Anybody heard of this? This question should probably be in tech...maybe I'll post a thread over there...
5.0Droptop
...all those nights we shared, and you're a dude??
Special Agent Mukity-Muck Whats in Charge Round Here
- Dec 19, 2010
- 5,720
- 4,243
- 224
5.0Droptop
...all those nights we shared, and you're a dude??
Special Agent Mukity-Muck Whats in Charge Round Here
- Jul 21, 2005
- 2,169
- 145
- 155
Cobra912
Active Member
Shaolin Crane
Banned
I iz ninja, no need for bail money. But if you got cash to spare i need to pay for my valve springs 
