• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Tips/tricks/info on installing front springs?

  • Thread starter Thread starter MustangLife
  • Start date Start date Mar 10, 2004
M

MustangLife

Active Member
Jan 5, 2003
1,285
0
36
Chattanooga, TN
Mar 10, 2004
#1
  • Mar 10, 2004
  • #1
Me and my friend will be installing front springs on my 03 gt in a day or two. Any info yall can give me. We will have a spring compressor and we are taking off eibach sportlines and installing fox body 4 cylinder springs. Any info is appreciated. This will be my first spring install

Thanks
Josh
 

JonJon

Founding Member
Aug 16, 2002
4,801
1
68
back in Marylands
Mar 10, 2004
#2
  • Mar 10, 2004
  • #2
http://www.mustangworld.com/ourpics/fcar/steedaspring1.htm
 

xomp

Founding Member
Sep 8, 2002
91
0
6
SOCAL
Mar 10, 2004
#3
  • Mar 10, 2004
  • #3
http://www.stangnet.com/tech/spring.html
 

dkshadow

Banned
May 12, 2003
952
0
0
TEXAS
Mar 10, 2004
#4
  • Mar 10, 2004
  • #4
JonJon said:
http://www.mustangworld.com/ourpics/fcar/steedaspring1.htm
Click to expand...
Werd !


Follow that and it should be a simple task. It took me less than 2 1/2 hrs to install the fronts, including the time my friend came over to distract me. It shouldnt be hard to do. Jack car up and put jackstands inplace. Unbolt caliper and make sure to get it out of the way. Get the ABS harness out of the way also, you dont want to 'Kiss Me''Kiss Me''Kiss Me''Kiss Me' that up. Jack up A arm. Unbolt Struts. Decompress jack, lower strut & A-arm and pry bar the hell out of the springs. and reverse procedure. Easier to do than having to 'Kiss Me''Kiss Me''Kiss Me''Kiss Me' around with the Tie-Rod ends and then needing to get an alignment.


Sorta off topic but not, I cut half a coil off my Fox 4 cyl springs and left the isolators off and my car looks dropped like a bitch. I got like around 1 3/4" of wheel gap left .
Ill get some pics posted in a week or two.
 

S.D.-Stangman

Founding Member
Jul 17, 2002
580
0
0
San Diego, Ca
Mar 10, 2004
#5
  • Mar 10, 2004
  • #5
dkshadow said:
Werd !


Follow that and it should be a simple task. It took me less than 2 1/2 hrs to install the fronts, including the time my friend came over to distract me. It shouldnt be hard to do. Jack car up and put jackstands inplace. Unbolt caliper and make sure to get it out of the way. Get the ABS harness out of the way also, you dont want to 'Kiss Me''Kiss Me''Kiss Me''Kiss Me' that up. Jack up A arm. Unbolt Struts. Decompress jack, lower strut & A-arm and pry bar the hell out of the springs. and reverse procedure. Easier to do than having to 'Kiss Me''Kiss Me''Kiss Me''Kiss Me' around with the Tie-Rod ends and then needing to get an alignment.
Click to expand...
Well said, however you shouldnt need a prybar or spring compressors if you are removing sportlines. Once you let the a-arm down after unbolting the strut, the spring should pull right out.
 
M

MustangLife

Active Member
Jan 5, 2003
1,285
0
36
Chattanooga, TN
Mar 11, 2004
#6
  • Mar 11, 2004
  • #6
Thanks for the replys.

Josh
 

jeffnoel

Founding Member
Aug 31, 2002
1,638
5
37
Clovis, CA
Mar 20, 2004
#7
  • Mar 20, 2004
  • #7
This was the best install directions I could find. No need to unbolt anything under the hood, just disconnect the strut from the spindle. Took me 3 hours to do all 4 springs BY MYSELF.

http://www.yellowmustangregistry.com/vogtland.html
 
You must log in or register to reply here.

Similar threads

6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
749
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
J
Wheels-Tires Need Some Help - Brakes Upgrade/Wheel fitment
  • jaygee15
  • Dec 8, 2025
  • Fox 5.0 Mustang Tech
  • 3 4 5
Replies
81
Views
2K
Fox 5.0 Mustang Tech May 6, 2026
AeroCoupe
Gen 3 Coyote Swap Variable Displacement AC Compressor Troubleshooting
  • rydnoryder
  • Jun 12, 2025
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
2
Views
752
2015 - 2023 (S550) Mustang -General/Talk Jun 16, 2025
rydnoryder
G
Front Sway bar HELP
  • Grabberblueguy77
  • May 28, 2025
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
4
Views
360
2005 - 2014 S-197 Mustang -General/Talk- May 28, 2025
gkomo
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
459
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?