• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

tko 600 and rst twin clutch set up

  • Thread starter Thread starter keatdog
  • Start date Start date Jun 23, 2009
K

keatdog

New Member
May 30, 2009
1
0
0
Jun 23, 2009
#1
  • Jun 23, 2009
  • #1
hey gyys and gals i need help well more or less knowledge with the tko 600 and the Mcloud RST STREET TWIN CLUTCH setup how should a preson go about breaking in this setup tell you whats going on i have a 1995 GT scrapped the motor and trans threw a 351 stroker in it and mating it with the Mcloud RST STREET TWIN CLUTCH and the tko 600 what is the preks and all the negetive input would be greatly appericiated photos comming soon start to finish exclusively on allfordmustangs.com because this is the best site on the net thge support is great i have heard some of both sides im kinda nervous about the twin setup never fooled with one yet al of this is going to go down within the next week so im getting worse as time goes by and im about ready to send it back and just go with a one disk setup

HELP PLEASE


thanks
keatdog
 

ProKiller

Founding Member
Apr 26, 2002
3,064
15
78
PA
Jun 23, 2009
#2
  • Jun 23, 2009
  • #2
never dealt with one either and i don't know anybody who has. they make single discs that can hold back pretty much anything so i don't see the point in messing with it.

anxiously awaiting pics and details. opcorn:
 

revhead347

Apparently my ex-husband made that mistake.
20+ Year Stangneter
Jun 14, 2004
9,302
1,645
214
Acworth, GA
Jun 23, 2009
#3
  • Jun 23, 2009
  • #3
I had a friend who had a Mcleod twin disk. He said it used to bind up all the time. I heard the SPEC twin disk doesn't have this problem, but I've never met anyone who used one. You'd be fine with a single disk. The twin disk gives you less pedal effort, and is suposed to be better on your drivetrain, while still being able to support 1100 ft.lbs of torque. Damn they are expensive though. There isn't much break in period on a normal clutch, and even less on the twin disk. Just go easy on it for about a day.

Kurt
 

str8stang036

New Member
Dec 28, 2002
1,382
0
0
Miami
Jun 23, 2009
#4
  • Jun 23, 2009
  • #4
I used to have a tko-600 and mcleod twin disk behind a 358w with twin turbos and the pedal effort was easy. Just make sure you install it correctly and give it about 500- 1000 miles to break in. I never made it that far, I switched to a powerglide.
 
You must log in or register to reply here.

Similar threads

SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
6K
1994 - 1995 Specific Tech Jun 28, 2026
GearHeadGuy
D
liberty gears tko 600
  • dodge12valve
  • Jun 17, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 18, 2019
79 Fox
N
SOLD Supercharged 1989 SSP Coupe $13,500 obo
  • notchlubber
  • Jul 17, 2018
  • Fox Body Mustangs For Sale (1979-93)
Replies
13
Views
13K
Fox Body Mustangs For Sale (1979-93) May 28, 2020
notchlubber
N
T
600+hp Gear Ratio And Rpm Help
  • TomasV
  • Apr 10, 2016
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
4
Views
4K
2005 - 2014 S-197 Mustang -General/Talk- Apr 11, 2016
TomasV
T
TKO 600 Questions...
  • KrazZ27
  • Feb 13, 2012
  • 1994 - 1995 Specific Tech
Replies
12
Views
2K
1994 - 1995 Specific Tech Mar 6, 2012
revhead347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?