Today, I join the N/A 12 sec club

95snoozer

Active Member

Dec 14, 2002

2,572

1

48

RCR

Feb 26, 2004

#1

• Feb 26, 2004

• #1

some cool weather rolled in today so I knew this was my night. I almost didnt make it out to the track due to other obligations. I was running errands and didnt get to the track until almost 10

ran 13.05 then 13.04, then it came...

1.78 60'
8.26 @ 83.47
12.95 @ 104.9


after that pass, I am retiring the car.
mods are in the sig.
Stock heads
stock rear,
stock tranny

 

HtownGT

New Member

Dec 5, 2002

544

0

0

Houston

Feb 26, 2004

#2

• Feb 26, 2004

• #2

congrats, especially with the stock tranny and heads. thast really damn good. congrats again!

 

Joe 5.0

Founding Member

Feb 1, 2002

1,184

2

38

Macomb, MI (metro detroit)

Feb 26, 2004

#3

• Feb 26, 2004

• #3

Thats freakin awesome, especially since some guys cant hit 12's with H/C/I. 105mph is damn strong for your mods, any dyno numbers?

 

Rootus

Officially Addicted

Feb 8, 2003

6,659

1

0

Portland, Oregon

Feb 26, 2004

#4

• Feb 26, 2004

• #4

Congratulations!!!

 

95snoozer

Active Member

Dec 14, 2002

2,572

1

48

RCR

Feb 26, 2004

#5

• Feb 26, 2004

• #5

jtkz13 said:

Thats freakin awesome, especially since some guys cant hit 12's with H/C/I. 105mph is damn strong for your mods, any dyno numbers?

Click to expand...

hmm last dyno was 246/290..... but who knows what its as now. lil different timing and a homemade cai plus the car is a few mph faster from when I dynoed

 

WhiteDevil

New Member

Feb 4, 2003

2,717

0

0

San Diego

Feb 26, 2004

#6

• Feb 26, 2004

• #6

Wow that MPH is so unreal. I cant believe it, thats only like 2mph under what most H/C/I run. I am very surprised.

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

Feb 26, 2004

#7

• Feb 26, 2004

• #7

Good work man..12's are not easy..esp with your mods...Your times are really consistent too!

Let's see you do that in the summer
RC

 

fiveotony

Founding Member

May 20, 2001

1,437

0

0

Gainesville, Ga

Feb 26, 2004

#8

• Feb 26, 2004

• #8

congrats man. Jeez I have H/C/I running street warrior and he is faster than me lol.

 

95snoozer

Active Member

Dec 14, 2002

2,572

1

48

RCR

Feb 26, 2004

#9

• Feb 26, 2004

• #9

94GTLaserRC said:

Good work man..12's are not easy..esp with your mods...Your times are really consistent too!

Let's see you do that in the summer
RC

Click to expand...

with summer comes job, with job comes heads, after heads comes nitrous

 

red94fiveo

New Member

Apr 12, 2003

1,269

0

0

Wichita, KS

Feb 26, 2004

#10

• Feb 26, 2004

• #10

Damn, graet times! Thats one hell of an accomplishment for stock heads. I'd love to see what you could run with a set of AFR's and 4.10's. Maybe give Paul a run for his money. How much does your car weigh anyway?

 

95snoozer

Active Member

Dec 14, 2002

2,572

1

48

RCR

Feb 26, 2004

#11

• Feb 26, 2004

• #11

last night it was a heavy 3265

It hads been lighter, but I had stuff and more gas than usual

 

zenboy99

Founding Member

May 12, 2002

2,212

0

47

Madison, WI

Feb 26, 2004

#12

• Feb 26, 2004

• #12

What rear tires are you running? Thats a great 60 foot time for stock suspension, I'm ridiculously jealous

 

Killercanary

The car that set the bar.

Founding Member

Nov 29, 1999

5,676

1

76

Altoona, PA

Feb 26, 2004

#13

• Feb 26, 2004

• #13

I must say congrats. I remember when you first came here and asked about running 12's on the stock heads... I told you I didn't see it happening, but you did it and I give you props. Plus you presented your accomplishments in a nice way, and for that I really give you props! Way to go!!! I wanted to ask you if you managed to do it at the turbo mustang shootout, but forgot to.


Tell us more about the run, ie launch rpm, shift points etc. How about a complete pic of the slip so we can see your 330', 1/8th, etc. There are a lot of similarly equipped cars here and they could benefit from it.

 

Killercanary

The car that set the bar.

Founding Member

Nov 29, 1999

5,676

1

76

Altoona, PA

Feb 26, 2004

#14

• Feb 26, 2004

• #14

95snoozer said:

last night it was a heavy 3265

Click to expand...

That's funny...

I could only dream of being so light!!!

 

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"

15 Year Member

Nov 29, 1999

14,679

424

154

Boca Raton, Florida

Feb 26, 2004

#15

• Feb 26, 2004

• #15

Congrats, that good enough for 10th on the N/A stock block 1/4 mile list. Would be #1 if it was broken out into stock heads.

 

95snoozer

Active Member

Dec 14, 2002

2,572

1

48

RCR

Feb 26, 2004

#16

• Feb 26, 2004

• #16

zenboy99 said:

What rear tires are you running? Thats a great 60 foot time for stock suspension, I'm ridiculously jealous

Click to expand...

these are M&H muscle car drag tires. 305/40/16
please excuse the poor pic quality

 

95snoozer

Active Member

Dec 14, 2002

2,572

1

48

RCR

Feb 26, 2004

#17

• Feb 26, 2004

• #17

Killercanary said:

I must say congrats. I remember when you first came here and asked about running 12's on the stock heads... I told you I didn't see it happening, but you did it and I give you props. Plus you presented your accomplishments in a nice way, and for that I really give you props! Way to go!!! I wanted to ask you if you managed to do it at the turbo mustang shootout, but forgot to.


Tell us more about the run, ie launch rpm, shift points etc. How about a complete pic of the slip so we can see your 330', 1/8th, etc. There are a lot of similarly equipped cars here and they could benefit from it.

Click to expand...

I will scan it later....

60'------1.7842
330'-----5.3034
1/8 ET---8.2621
1/8 MPH--83.47
1000'-----10.8067
1/4-------12.9586
1/4 mph---104.90

launching... I just rev around 4 and when the lights come bring it up to 5, floor it and pull off the clutch quickly all at the same time..... no real launch rpm, because I am just WOT. the tires fight for traction and finally grab after I am passed the tree. I shift out of 1st about 5800 cause the gear is so fast
and then go off my 5600 shift light for all my other shifts

here is my dyno form a year ago...
http://www.sesamestreetracing.com/my dyno biiiig.JPG

At the turbo mustang shootout, I took 2nd in the 12.9+ class I lost to an 03 cobra that was letting off to run in the 12.9+ index
when I worried about cutting lights I could never manage to launch it hard... to busy timing. but the 5hundred-6hundred lights did me well.

I won an aeromotive billet inline fuel tank pickup and a gift certificate for a custom tuned chip.... But its in michigan I probably have to sell it.

 

94Blue302GT

Member

Oct 20, 2003

704

3

19

Chicago

Feb 26, 2004

#18

• Feb 26, 2004

• #18

Those are all great times. I SO hope i get even CLOSE to that. i have to rely on my dremel to get me quicker due to my low income and school. Those slicks have GOT to help BIG TIME. I'm wondering if anyone took a totally stock stang and just threw on slicks what he would get?
Lee

 

GTPhreak

Founding Member

Mar 16, 2000

5,505

0

77

Rowlett, TEXAS

Feb 26, 2004

#19

• Feb 26, 2004

• #19

cool now I know 2 texas boys in the 12's with stock heads/cam 94/95 gt models

 

95snoozer

Active Member

Dec 14, 2002

2,572

1

48

RCR

Feb 26, 2004

#20

• Feb 26, 2004

• #20

94Blue302GT said:

Those are all great times. I SO hope i get even CLOSE to that. i have to rely on my dremel to get me quicker due to my low income and school. Those slicks have GOT to help BIG TIME. I'm wondering if anyone took a totally stock stang and just threw on slicks what he would get?
Lee

Click to expand...

MMFF did..... do a search and you will find the thread somewhere