Tokico Illumina Settings

Phoenix00GT · May 12, 2004

I'm starting to question the settings that I have on my Illuminas and I was wondering what other people are running when they are on the street.

What I have right now is 4 up front and 2 in back.

Heathdude · May 12, 2004

5f / 4r is what most folks are running with H&R SS on the Mach 1 site, I think.

4.6_02_Black_GT · May 12, 2004

I run all 4 corners at 5

Phoenix00GT · May 12, 2004

4.6_02_Black_GT said:
I run all 4 corners at 5

Doesn't that cause a lot of oversteer...I've got an extra 200lbs in my trunk because of all of the audio stuff, so it oversteers as it is

Spreadman · May 12, 2004

4.6_02_Black_GT said:
I run all 4 corners at 5

Me too. And I've got audio gear as well. I also have upper and lower control arms. But my car handles awesome. Not much understeer.....nothing that can't be fixed by letting off the gas.

KaPPaBaLL · May 12, 2004

Phoenix00GT said:
Doesn't that cause a lot of oversteer...I've got an extra 200lbs in my trunk because of all of the audio stuff, so it oversteers as it is

try 3 in the back.. you should be fine.

remember at the track if you ever do go. softest up front/stiffest in the rear.

btw. where in the bay are you?

Phoenix00GT · May 13, 2004

thanks guys...I'll try bringing the backs up to 3s and the fronts to 5s and run that around town for the next couple weeks and see if I like it better.

yeah, when I'm on road courses I have a setup that works really well with the way I drive (2 in front and 5 in back)...but that's because I want to induce the oversteer so I can drift the rear end around the corners...I also tighten up the adjustable rear sway to help with that

CottonBurnerz · May 13, 2004

What do you all think is the best combo to minimize the scraping and maximize the ride quality while cruising? I just installed my tokico.. Guess I should test them all out

lwkauble · May 13, 2004

KaPPaBaLL said:
try 3 in the back.. you should be fine.

remember at the track if you ever do go. softest up front/stiffest in the rear.

btw. where in the bay are you?

I have the tokicos and h&r SS springs. I have it set to 5 on all 4 corners. Because of the drop I ended up with, the x brace under my K-member srcapes everything because there is like barely and inch of ground clearance left. On the bayarea freeways you don't want your mustang dippin' because you're likely to rip out the k-member on the asphault that sometimes stick up. I.E highway 680 north in pleasanton area. if you hit a dip with 5 setup on all corners you will fair better. I actually liked the 3F and 4R because it gave such a nice ride, but I had to change it. now I'm left looking for more clearance without changing springs. Maybe 18" wheels.

GinoGT · May 13, 2004

Wouldn't you want set the rear soft for drag too? I set all of them to 1 for the track, but that's basically to band-aid fix my anti-weight transfer H&R SS springs.

KaPPaBaLL · May 13, 2004

lwkauble said:
I have the tokicos and h&r SS springs. I have it set to 5 on all 4 corners. Because of the drop I ended up with, the x brace under my K-member srcapes everything because there is like barely and inch of ground clearance left. On the bayarea freeways you don't want your mustang dippin' because you're likely to rip out the k-member on the asphault that sometimes stick up. I.E highway 680 north in pleasanton area. if you hit a dip with 5 setup on all corners you will fair better. I actually liked the 3F and 4R because it gave such a nice ride, but I had to change it. now I'm left looking for more clearance without changing springs. Maybe 18" wheels.

you misunderstood me. I said AT THE TRACK softest up front stiffest in the rear. TRACK TRACK TRACK TRACK

lwkauble · May 13, 2004

KaPPaBaLL said:
you misunderstood me. I said AT THE TRACK softest up front stiffest in the rear. TRACK TRACK TRACK TRACK

I didn't misunderstand anything. i was simply stating what I have set mine to.

BTW: you go to Sears point?? (My bad... Infineon?) Will always be sears point to me.

KaPPaBaLL · May 13, 2004

lwkauble said:
I didn't misunderstand anything. i was simply stating what I have set mine to.

BTW: you go to Sears point?? (My bad... Infineon?) Will always be sears point to me.

havne't gone to sears point. one day in the summer i plan on going to sac raceway but that's after i get rid of this stupid slipping clutch.. Mcleod clutch and fidanza aluminum flywheel here i come.

01GT eibach · May 14, 2004

CottonBurnerz said:
What do you all think is the best combo to minimize the scraping and maximize the ride quality while cruising?

My car is purely a street car. I have mine set at 1 all the way around. Even at 1, the ride is still firm and handles great. But I guess that makes me the wimp of the group...

XTONKAX · May 14, 2004

4 all around. I'm used to it.

Tokico Illumina Settings

Phoenix00GT

New Member

Heathdude

New Member

4.6_02_Black_GT

Phoenix00GT

New Member

Spreadman

two wheels

KaPPaBaLL

New Member

Phoenix00GT

New Member

CottonBurnerz

Banned

lwkauble

GinoGT

KaPPaBaLL

New Member

lwkauble

KaPPaBaLL

New Member

01GT eibach

Active Member

XTONKAX

New Member

Similar threads

Tokico Illumina Settings

New Member

New Member

New Member

two wheels

New Member

New Member

Banned

New Member

New Member

Active Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency