told i had a cracked ring ???

[putnam88]

i have oil coming out my pcv could it be due to worn pistons, cracked or bent rings???

 

[noslow1986]

i have little oil in my too i wouldnt worried about it to much

 

[rickd93_lx]

change the valve

 

[Black1987Stang]

u do have that wire mesh under the pcv valve right???......to check for blowby supposedly u can just take off the oil cap with engine running and see if u feel positive pressure

 

[gcwh02]

before you get upset, check your compression.

 

[putnam88]

i have not check compression yet but i do have the screen in and i took off my pcv hose and smoke and oil was shooting outta it

 

[FeTTstang]

i have not check compression yet but i do have the screen in and i took off my pcv hose and smoke and oil was shooting outta it

Yea that doesnt sound normal. Do a compression check.

 

[304billet]

change the valve. I had blowby on my 347 stroker from rings that did not seat properly. The blowby pushed the dipstick out of the holder by about 1/2".

I have never heard a cracked ring will make ur motor puke oil out the PCV valve.

 

[putnam88]

i have replaced the pcv and thats what i had read or the rings worn or thw cylinder and on the compression strok all the pressure will go to crank case and out pcv