Topic Beat to Death

[onebad95]

I want to put alum. valve covers on the car, and need to know which one's work without major modification. I have 1.7 rr's and don't mind messing with the oil tube plate. Which one's have you guys used that work???

 

[94GTLaserRC]

Ill sell you my chromers for $20. You just need a new gasket. Javi and Jose have them, but I decided to keep my stock ones and paint them.

RC

 

[Eric94GTvert]

I bought some stock fox VC's on ebay for $15 with shipping. I heard this is the most trouble free way to clear RR. They were butt ugly but I've been polishing them when ever I have time. This way, I'll have them when I decide to do the H/C swap.

 

[Rootus]

I've got Fox VC's, and other than some clearancing on the inside where the oil fill tube is, they clear everything nicely.

 

[HoofnIt]

While we're on the subject...I also have some '93 Fox body valve covers that I am also polishing. They came without the plate that covers the underside of the oil fill tube. Do I have to have one? Without one will oil just go up and out of the PCV tubing and into the intake tract? Hmmmmm.

 

[1105]

You need to have that baffle off for roller rockers to clear it.

 

[onebad95]

Ill sell you my chromers for $20. You just need a new gasket. Javi and Jose have them, but I decided to keep my stock ones and paint them.

RC

check your pm box.

 

[RIO5.0]

Charlie...I run the same type as RC has for sale...what intake do you have???

 

[onebad95]

I have the edelbrock performer intake.

 

[YEAHLOH95]

i have trick flow low profile ones and they work with little trouble just a little messing with the egr bung and the nice thing is you can put your oil fill wherever you want !