S sage2k Member May 23, 2005 645 0 16 Baton Rouge, LA Nov 23, 2005 #1 Nov 23, 2005 #1 Gonna install underdrive pulleys this weekend, do they need to be torqued to a certain # or do I just hand tighten?
Gonna install underdrive pulleys this weekend, do they need to be torqued to a certain # or do I just hand tighten?
Blackened302 Active Member Jul 21, 2005 1,439 0 36 South TX Nov 23, 2005 #2 Nov 23, 2005 #2 i installed some on a new edge a couple months ago--hand tightened. they havn't flown off yet!
94GTLaserRC Squint as you approach, lest you be blinded by my 15 Year Member May 7, 2002 11,178 13 89 Ernan Says "here it comes... dushbag" Nov 23, 2005 #3 Nov 23, 2005 #3 Usually, fairly "hand snug", then run the car a few minutes, check again, then drive the car, then check again. The WP and crank pulleys have more than one bolt...should be fine. The Alt pulley should be put on using an air ratchet. RC
Usually, fairly "hand snug", then run the car a few minutes, check again, then drive the car, then check again. The WP and crank pulleys have more than one bolt...should be fine. The Alt pulley should be put on using an air ratchet. RC
S sage2k Member May 23, 2005 645 0 16 Baton Rouge, LA Nov 23, 2005 #4 Nov 23, 2005 #4 cool, gonna skip the alt pulley prolly
94GTLaserRC Squint as you approach, lest you be blinded by my 15 Year Member May 7, 2002 11,178 13 89 Ernan Says "here it comes... dushbag" Nov 23, 2005 #5 Nov 23, 2005 #5 If you dont change ALL the pulleys, you may need a new belt. RC
S sage2k Member May 23, 2005 645 0 16 Baton Rouge, LA Nov 23, 2005 #6 Nov 23, 2005 #6 many people on the forums have said i wouldnt need a new belt?
M Muy_Pyro New Member Apr 8, 2005 52 0 0 Flint, MI Nov 23, 2005 #7 Nov 23, 2005 #7 I changed all but the Alt. Pully with the BBK Pully kit, belt fits fine
94GTLaserRC Squint as you approach, lest you be blinded by my 15 Year Member May 7, 2002 11,178 13 89 Ernan Says "here it comes... dushbag" Nov 23, 2005 #8 Nov 23, 2005 #8 The belt is made to fit based on the total of the diameters of all the pulleys....If that TOTAL number changes, the belt will not fit. (if you change to a WHOLE set of underdrives, the total diameter will not change) RC
The belt is made to fit based on the total of the diameters of all the pulleys....If that TOTAL number changes, the belt will not fit. (if you change to a WHOLE set of underdrives, the total diameter will not change) RC