Traction Lok Rebuild Help

Kdubslugga

Active Member
Jun 7, 2003
1,515
3
38
Akron, OH
Ok Ive had my car apart for a week i need to get this crap done, I know how the clutches and crap go in im doing it the way my instructions tell me to, im stumped on the shims and the pinion gears, ive tried all the shims in the kit from .025 to .045 and i drop the pinion gear in spin them around tap the s = spring into place and the pinion shaft and the gears will not not move they wont budge are they suppose to be almost impossible to turn, what am i doing wrong, is there a certain way the pinion gear have to seat into the ring gears, ??? Im stumped its pissin me off, this is supposed to be easy!
 
After you install the frictions, steels, and shims, you rotate the gears together till the holes line up so you can install the crosspin. After you install the crosspin and the s-spring you shouldn't be able to move the gears by hand.