• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Tranny and axle ?

  • Thread starter Thread starter Nevik
  • Start date Start date Mar 3, 2006
N

Nevik

New Member
Mar 3, 2006
4
0
0
Mar 3, 2006
#1
  • Mar 3, 2006
  • #1
Help me figure out parts prices?

I'm parting out a GT and I'm curious about the price range for a few items, and am having problems researching. Does anyone have a good site that has price ranges for new/used parts...8.8 rear end, seats doors(can't find doors anywhere).

I would like to get a ball park range for thewhole manual transmission assembly, but am usure what to charge? What would be a goos price for the tranny, bell housing, clutch fly-wheel, pressure plate, clutch cable, clutch pedal and quadrant....it's a 94 with 125,xxx miles.

Also, the rear end assembly with brakes, along with the front spindles and brake system. I was think about just droping the k-member and everything attached and putting it in the package what would be a resonable price for this...$1200.

Any help would be greatly appreciatted!

Thanks in advance :SNSign:

I am not targeting a sale in this thread, I'm doing some digging on what I should price things at for when I post in the classifieds.
Any input would be greatly appreciated.
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Mar 3, 2006
#2
  • Mar 3, 2006
  • #2
check e-bay and see what they are selling the same parts for. thats a good starting point....
 
N

Nevik

New Member
Mar 3, 2006
4
0
0
Mar 3, 2006
#3
  • Mar 3, 2006
  • #3
Thanks for the reply!

I have checked there and the interior parts get good money for them, but as far as heavy stuff...I really haven't seen them on there! I have seen new axles being sold, but no the whole assembly.
 

go-stang5.0

New Member
Jan 27, 2003
2,244
0
0
Glenview,Il
Mar 3, 2006
#4
  • Mar 3, 2006
  • #4
I know you didn't mean for this to be a sale thread...but I would like to buy your spout connector (for timing) and the rear abs sensors (I need the harness from the chassis side also along with some of the wire for that so I can splice) so if you could clip the whole assembly at the bracket where the wire comes off the chassis and to the hub that would be great. You can pm me or email me if this is possible and whatever price you wanna charge and we can work things out from there. My email is rdesai8@uic.edu. Drop me a line I would appreciate it. -Thanx
 
N

Nevik

New Member
Mar 3, 2006
4
0
0
Mar 6, 2006
#5
  • Mar 6, 2006
  • #5
top
 
You must log in or register to reply here.

Similar threads

P
2002 T5 transmission vibration issue
  • puffoo
  • Feb 22, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
156
SN95 V6 Mustang Tech Feb 22, 2026
puffoo
P
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
15
Views
461
SN95 V6 Mustang Tech Jun 28, 2026
joeybuddy96
J
SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
975
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
C
Help identifying 8.8
  • Caden_H
  • Jun 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
608
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 12, 2025
limp
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?