• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Tranny bolts

  • Thread starter Thread starter MUSTANGJOE
  • Start date Start date Jun 14, 2006

MUSTANGJOE

Silver Stanger
Founding Member
Apr 9, 2002
1,644
17
59
Jun 14, 2006
#1
  • Jun 14, 2006
  • #1
Hey guys..

I forgot how to do this...can someone tell mne how you remove the 2 upper tranny bolts when changing the clutch?

Thanks
 

5.0 Nostalgia

10 Year Member
Feb 28, 2003
904
5
39
CT
Jun 14, 2006
#2
  • Jun 14, 2006
  • #2
I usually use a swivel socket and an extension.
 

352Ford2

New Member
Oct 12, 2005
393
0
0
Seattle,WA
Jun 14, 2006
#3
  • Jun 14, 2006
  • #3
I pull the bellhouseing and trans out as a unit
 

MUSTANGJOE

Silver Stanger
Founding Member
Apr 9, 2002
1,644
17
59
Jun 14, 2006
#4
  • Jun 14, 2006
  • #4
352Ford2 said:
I pull the bellhouseing and trans out as a unit
Click to expand...

So do I, I've seen some one take it a part in two peices and it seems so much easier!..I mean your in perfect range of the upper bolts.
 

chobracobra

New Member
Jun 29, 2004
175
0
0
jersey shore
Jun 14, 2006
#5
  • Jun 14, 2006
  • #5
get a nice long 36" extension with a swivel head. drop the crossmember and support the tranny with a jack. lower it a bit, not putting too much stress on everything else,and put some muscle on those bolts. no problem
 

MUSTANGJOE

Silver Stanger
Founding Member
Apr 9, 2002
1,644
17
59
Jun 15, 2006
#6
  • Jun 15, 2006
  • #6
chobracobra said:
get a nice long 36" extension with a swivel head. drop the crossmember and support the tranny with a jack. lower it a bit, not putting too much stress on everything else,and put some muscle on those bolts. no problem
Click to expand...

Thanks!
 
R

radtke5.0

New Member
May 24, 2006
11
0
0
Jun 15, 2006
#7
  • Jun 15, 2006
  • #7
yesterday i droped my trany by my self just put a jack under your oil pan with a block of wood on it. loosen the four bolts - bottom two are easy- use an extention with a swivel for top drivers side. and the same for the passengers but i found using a deeper socket worked a little better. for me it's alot easier than doing the bellhousing and tranny together.
 

chobracobra

New Member
Jun 29, 2004
175
0
0
jersey shore
Jun 15, 2006
#8
  • Jun 15, 2006
  • #8
yesterday i droped my trany by my self just put a jack under your oil pan with a block of wood on it. loosen the four bolts - bottom two are easy- use an extention with a swivel for top drivers side. and the same for the passengers but i found using a deeper socket worked a little better. for me it's alot easier than doing the bellhousing and tranny together.
Click to expand...

Yea i agree. Its deff easier to drop the tranny first and work on the bellhousing by itself. You have plenty more room and it is much less awkard. Now i'm all confused. I dont remember if the swivel is still needed. I was actually reffering to when I dropped the AOD out. Its all one unit so the whole engine/tranny had to tilt back and thats when i used the extension. I guess it you want to do it all at once(bell and tranny) your gonna have to tilt it and use the extension.
I'm just happy the AOD stayed out and the tremec went in. It cant be much fun putting the auto back in. the 5 speed install was relativley painless and straight foward.
PS- never take out an AOD by yourself...
 
You must log in or register to reply here.

Similar threads

Resolved 1999 cobra removed lower intake manifold to crossovertube
  • hvcobra99
  • Sep 6, 2026
  • SVT Tech Forum
Replies
0
Views
168
SVT Tech Forum Sep 6, 2026
hvcobra99
coil pack bracket
  • SteveG94GT
  • Apr 11, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
184
SN95 V6 Mustang Tech Apr 11, 2026
SteveG94GT
D
rear upper seat trim panel for 1995 ford mustang.
  • dustinbowman95gt
  • Aug 27, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
96
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 27, 2026
dustinbowman95gt
D
Engine Retorque lower intake manifold bolts
  • 91GTstroked
  • Sep 8, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
414
Fox 5.0 Mustang Tech Sep 8, 2025
Noobz347
Drivetrain Tail Shaft bore odd shape
  • R82148V
  • Jun 12, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
205
Fox 5.0 Mustang Tech Jun 13, 2026
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?