Tranny HELP!!

[growth]

Have a 68 Stang with a 70 302 motor and C4 tranny. Am putting in an AOD tranny. I know the C4 and 302 need a 28 oz balancer and flexplate and I need a 50 oz set for the AOD. I got the flexplate but what balancer do I need to get??? I got one that was off a late model that come witth the tranny but the timing marks are all wrong. Any ideas?

 

[rbohm]

ok, first you need the balancer and flexplate for the engine, NOT the tranny. that means you need a 164 tooth flexplate with a 28oz balance factor. you can get one from a 351w that uses the AOD, or you can use a C6 flexplate. summit racing has one, 164 tooth with 11.4" converter bolt circle 28oz balance factor, for about $80.

 

[growth]

Thanks for the help. Might need more when I try and get this thing in

 

[steel1212]

I've never done this swap but your tranny doesn't require anything but a flexplate. If you where useing a 28oz balanced motor then you still need a 28oz balancer and flexplate. You just might need a diffrent tooth flexplate to work with your starter and AOD's bell.