Transgo shift problems??

Just finished installing the AOD-HP kit in my 91 LX. Several problems have surfaced. I have a super crisp shift from 1-2, WOT it shifts around 4800. Once in 2nd it quickly shifts to 3. I mean like 100-200 rpm then it hits 3rd. Also I have no OD at all??

I followed the printed instructions and omitted the Hi-Rev kit. I installed the two extra springs on top of the 2-3 accumulator per the instructions. I also dropped the A servo expecting to change something on it, but the kit did not have anything to replace. So i simply reinstalled it.

Gears are stock 2:73's but will soon be swapping in some 3:55's.

Any help is much appreciated.

small update. I noticed that the tranny was a quart over full, so I drained it down to read normal on the dipstick. Seems to have taken care of the early 2-3 shift. I have also noticed that the 2-3 shift is rather unpredictable.

I am thinking the TV cable needs adjusting? Could a simple shift kit install mess this setting up? Also when I shift into OD the engine just revs up, like its out of gear???

Bump for some help!!

superhuaman,
Thanks for your input. I really doubt my tranny is shot. I have read every post on MustangForums about transgo shift kits, that is your answer to everyone. There is obviously something wrong with the valvebody, TV cable, or A selonoid from when I messed with them. The tranny now shifts fine from 1-2, 2-3. Shifts vary accordingly with pedal pressure, as they should. Just no OD still.
Still looking for more input. Thanks.

FYI, Called Transgo. They stated that the A selonoid was not installed correctly. Will check it this weekend and report back out.