• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Transmission Choice - 347 build

  • Thread starter Thread starter AnthonyR23
  • Start date Start date Oct 6, 2008

AnthonyR23

Member
Sep 8, 2006
661
0
16
Ontario
Oct 6, 2008
#1
  • Oct 6, 2008
  • #1
Hi, so I was having some issues with my t5, throw out bearing - etc.. and I sold it to a place that rebuilds them.... which helped me fund this engine build... I get my engine back friday... so I have to consider a transmission choice... thinking of tremec... and didn't sell my bell housing with the t5... wondering if that can still be used.... or is it better to just get a bellhousing with the new transmission... and will I still be able to use my stock clutch... I replaced it a few years back... but there is still alot of meat left on the clutch... .so was hoping I could just re-use it until it wears down ... then I would consider upgrading down the road... and with the tremec transmission choice... I'm not really sure what the differences are in the models of tremec.. and not sure about gear choice.. I know I will have to get a speedo gear to match the 4.10's ... so engine is 347 .. aluminum fidanza flywheel... trick flow intake and heads. ... car is a 88 convertible... will I just have to get a new crossmember... mine is brand new.... so I will probably just sell it cause I just replaced it last year...

I really am not sure about this so any gear choice advice... etc. would be awesome..

for 500 extra here or there will really not make a difference for me...

anyone know what the stock t5 input and output shafts spline's are 10 input or 26 input and output 31 ???

It says the crossmember needs to be moved back.... is that just for mounting... is the transmission still the same length...

thanks guys!!

there is tko 500 and tko 600 .82 o/d and .64 o/d
 

ShortThrow50

Member
Oct 22, 2006
923
2
16
Pa
Oct 6, 2008
#2
  • Oct 6, 2008
  • #2
I have tremec tko 600. You need a bellhousing and and you will need a driveshft yoke becuase of the spline difference. My tans has the 64 o/d. i wish i got the 82 becuase i dont really need to save on fuel, it would have been a nice to keep grabbin gears. You will also prolly need to get rid of those 4:10's in the future cause the tko first gear is pretty low for my 3;73's. (watch my video in my sig). Everything in this pic of mine below from a year and a half ago was from d and d performance and shipped to my door was 2200 bucks for EVERYthing. Took 2 days to get here. Also, im not sure u may have to replace the clutch becuase of a possible spline diff. im not sure though/ i bought a king cobra clutch from d and d which was included with that price as well.
almost forgot about the crossmember question. What you do is take your cross member and have some one grind the wilds off and slide the thing all the way back towards the rear off the car and throw a couple tack welds back on. You will see what im talkin about when you take yours off. i might be able to take a pic of mine tomorrow

 

Attachments

  • 2007050800005eq5.webp
    2.8 KB · Views: 162
  • 2007050800004dp7.webp
    2.8 KB · Views: 190

AnthonyR23

Member
Sep 8, 2006
661
0
16
Ontario
Oct 6, 2008
#3
  • Oct 6, 2008
  • #3
Car sounds really good man, that doesn't sound bad for 2200 for everything... isn't the 82 o/d pretty close in price too..
 

ShortThrow50

Member
Oct 22, 2006
923
2
16
Pa
Oct 6, 2008
#4
  • Oct 6, 2008
  • #4
AnthonyR23 said:
Car sounds really good man, that doesn't sound bad for 2200 for everything... isn't the 82 o/d pretty close in price too..
Click to expand...

Its pretty much the same price buddy
 
You must log in or register to reply here.

Similar threads

T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
319
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
Drivetrain How much resistance, if any at all, is normal on a new 1st gear and synchro on a WC T5 transmission?
  • sleep-e
  • Jan 21, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
344
Fox 5.0 Mustang Tech Jan 22, 2026
sleep-e
P
2002 T5 transmission vibration issue
  • puffoo
  • Feb 22, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
296
SN95 V6 Mustang Tech Feb 22, 2026
puffoo
P
G
Sup. Just got back into the game with a 1986 4-eye vert.
  • GeorgeG
  • Nov 3, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
150
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 7, 2026
limp
R
Drivetrain Clutch
  • Robman8028
  • Jun 29, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
358
Fox 5.0 Mustang Tech Jul 2, 2025
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?