Tremec TKX 5-spd

Chuckman · Mar 11, 2021

RekeHavoc said:
Is it installed yet? lol

Install starts when I get home from work tonight, plan to have her breathing fire this weekend.

90sickfox said:
Yup, no handle here for my 600.

The top of that trans looks super low. I don't expect you to have any issues with trans tunnel fitment. You're the first one here with one. Can't wait to see a documented install.

If you get someone to video it you might make money on YT. People are going to be searching like crazy for install and driving vids. They'll be hitting the forum, too.

Congratulations on being the first here, man !!!

Trust me, no one wants to watch my fat ass install a motor/trans. I will however try to take some pics, maybe some vid, of any problem areas or things that are different from a normal tko (which shouldnt be many since tkos drops into a fox without issue)

Chuckman · Mar 12, 2021

Been getting the prep work done, but this is where we're at before a quick supper break, still got a few prep items on the car itself but plan to at least have the it dropped in tonight and worry about the hookups tomorrow.

Also a couple small problems already: I 2day shipped a triad handle, but its made for 5/16 shifter bolts and the tremec shifter uses 3/8, easy enough to drill out. But the next problem is the bolts are too short for this handle and theyre fine thread (which of course I dont have on hand) so a hardware store trip is on the list for the morning. Again, not a huge issue, just annoying.

And yes, I am fully aware my phone camera is .

WhiteCobra95 · Mar 12, 2021

Don't worry about the phone camera, it just adds a glow to the pictures.

That's one nice looking motor in the background! Those look like some pretty healthy exhaust ports!

Chuckman · Mar 12, 2021

and its in, trans is just being held up with the jack for now, calling it a day here been going since 430am

Chuckman · Mar 12, 2021

WhiteCobra95 said:
Don't worry about the phone camera, it just adds a glow to the pictures.

That's one nice looking motor in the background! Those look like some pretty healthy exhaust ports!

tea 240 high ports. it is a 427 afterall

Chuckman · Mar 28, 2021

alright, after a bunch of problem solving (nothing to the with the trans, almost 100% hydroboost and idiot related) i finally got a (short) test drive in today. so far, diggin the trans, not clunky like my old tko or mt82 in the coyote (which also likes to grind when cold). wish i knew how a new t5 shifted for comparison. i do know that even with a mgw shifter the mt82 is a bit more...vague? about going into gears. you can definitly feel the gating. but its pretty smooth.

couple more fiddly bits to fix (put interior back together, speedo cable came unhooked from the dash, a few tuning issues, etc) and we'll see how it does once im more used to the clutch (rxt btw if i didnt mention it already) and can do some higher rpm shifts.

RekeHavoc · Apr 16, 2021

Go to 9:22 if you want to skip to the actual driving impressions.

View: https://www.youtube.com/watch?v=pzYXR9IKrv0&t=3s

Mustang5L5 · Apr 16, 2021

Well i'm sold.

limp · Apr 16, 2021

I wonder who's shop that was?/ VERY NICE

Boostedpimp · Apr 16, 2021

I want one

Mustang5L5 · Apr 16, 2021

I guess for me, it's now TKX vs T-56.

My only reason for wanting the T56 is just to say I have the 6th gear. I need to sit down and do a cost comparision and really decide.

We'll see how my Dogecoin does

Reddevil91 · Apr 16, 2021

What would be the difference over all, idk much with the TKX, but I’ve wanted the t56, but then comes bell housing, clutch change, drive shaft etc. would this be the same thing if swapping over to the tkx.

limp · Apr 16, 2021

Reddevil91 said:
What would be the difference over all, idk much with the TKX, but I’ve wanted the t56, but then comes bell housing, clutch change, drive shaft etc. would this be the same thing if swapping over to the tkx.

Whats in your car now?

Reddevil91 · Apr 16, 2021

limp said:
Whats in your car now?

I’m running an old tremec T5

LX Dave · Apr 16, 2021

90sickfox said:
My tko600 shifts really smooth. Was upgraded by Hanlon Motorsports. Can't wait to see someone install and drive this tkx in a fox.

I just bought a TKO 600 a year ago. Day early and dollar short again. Got mine from Modern Driveline and had them do an upgrade for shifting. Mine is pretty smooth too. I am curious to drive something with the TKX though...

limp · Apr 16, 2021

Reddevil91 said:
I’m running an old tremec T5

You will need a new bellhousing not sure on your driveline... I have a SROD 4 speed I am replacing and my bellhousing bolts up to a TKo/TKX and I can reuse my driveline with the correct trans yoke...

Tremec TKX 5-spd

Chuckman

GTFO you fat, heavy bastard

Chuckman

GTFO you fat, heavy bastard

WhiteCobra95

Chuckman

GTFO you fat, heavy bastard

Chuckman

GTFO you fat, heavy bastard

Chuckman

GTFO you fat, heavy bastard

RekeHavoc

Member

Mustang5L5

That is…until I whipped out my Bissell

limp

wrap a little cheese around it and its a done

Boostedpimp

Mustang5L5

That is…until I whipped out my Bissell

Reddevil91

limp

wrap a little cheese around it and its a done

Reddevil91

LX Dave

limp

wrap a little cheese around it and its a done

Similar threads

Tremec TKX 5-spd

GTFO you fat, heavy bastard

GTFO you fat, heavy bastard

GTFO you fat, heavy bastard

GTFO you fat, heavy bastard

GTFO you fat, heavy bastard

Member

That is…until I whipped out my Bissell

wrap a little cheese around it and its a done

That is…until I whipped out my Bissell

wrap a little cheese around it and its a done

wrap a little cheese around it and its a done

Similar threads

Privacy & Transparency

Privacy & Transparency