smittyb Member Oct 16, 2005 134 1 19 Marysville,wa Oct 25, 2005 #1 Oct 25, 2005 #1 Does anyone know the spring rates for the Trick flow upgade springs? All Summit or Trick Flow has is the110lbs at 1.8". How aboout an open pressure? Sorry, double post.
Does anyone know the spring rates for the Trick flow upgade springs? All Summit or Trick Flow has is the110lbs at 1.8". How aboout an open pressure? Sorry, double post.
8 8950HO New Member Mar 31, 2005 658 2 0 Oct 25, 2005 #2 Oct 25, 2005 #2 I think open pressure is around 300lbs.Specs should be on TF`s site.
smittyb Member Oct 16, 2005 134 1 19 Marysville,wa Oct 25, 2005 #3 Oct 25, 2005 #3 They are not, at least I could not find them.
cobradvm New Member Sep 2, 2003 245 1 0 Woodinville, WA Oct 25, 2005 #4 Oct 25, 2005 #4 http://www.trickflow.com/product/fordcylinderheads/Trackheat_sbf/pr_trackheat_specs.asp
smittyb Member Oct 16, 2005 134 1 19 Marysville,wa Oct 25, 2005 #5 Oct 25, 2005 #5 How did I not think of that? I was just lookin at the spring section of the website. Thanks for the effort. Doesn't 360 lb/in seem a little low? Course that's relative to the cam, but still for a modern roller...
How did I not think of that? I was just lookin at the spring section of the website. Thanks for the effort. Doesn't 360 lb/in seem a little low? Course that's relative to the cam, but still for a modern roller...