• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Trickflow Intake problem

  • Thread starter Thread starter THELAW1
  • Start date Start date Nov 3, 2005

THELAW1

New Member
May 24, 2004
12
0
1
Nov 3, 2005
#1
  • Nov 3, 2005
  • #1
I recently had a bucking and cold start problem, and after time and money and a full can of carb cleaner I found a vacuum leak coming from behind the distributor, the gasket that's between the lower intake and spacer it's a 1in spacer, I also notice the one of the front intake bolts have some how came loose and now won't retight, anyone have this problem and how did you fix it, I don't want to kick out 400.00 bucks for another intake...it's only leaking in between the 2 bolts
 
S

ss93cobra

Founding Member
Apr 10, 2002
1,422
1
0
Wilmington NC
Nov 4, 2005
#2
  • Nov 4, 2005
  • #2
Sounds like it has to come apart. You'll need new upper gaskets and regarding your bolt not tightening down concern it sounds like your bolt or stud has stripped the threads on either the lower intake or the head. Time for a longer bolt and perhaps a helicoil kit.
 

Paul Perreca

New Member
Mar 30, 2005
1,085
0
0
Nov 4, 2005
#3
  • Nov 4, 2005
  • #3
yea u may have to drill and rethread (tap) the hole, and use a different bolt, than i dunno what torque specs would be -
 
S

ss93cobra

Founding Member
Apr 10, 2002
1,422
1
0
Wilmington NC
Nov 4, 2005
#4
  • Nov 4, 2005
  • #4
Paul Perreca said:
yea u may have to drill and rethread (tap) the hole, and use a different bolt, than i dunno what torque specs would be -
Click to expand...
Torque to 16-18 ft./lbs.
 

Paul Perreca

New Member
Mar 30, 2005
1,085
0
0
Nov 4, 2005
#5
  • Nov 4, 2005
  • #5
yea but with a different bolt/thread, i didn't know if that would change anything -
 
S

ss93cobra

Founding Member
Apr 10, 2002
1,422
1
0
Wilmington NC
Nov 4, 2005
#6
  • Nov 4, 2005
  • #6
Paul Perreca said:
yea but with a different bolt/thread, i didn't know if that would change anything -
Click to expand...
Nope
 
You must log in or register to reply here.

Similar threads

N
Need stainless carb heat shield
  • newmex999
  • Aug 29, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
2
Views
204
1965 - 1973 Classic Mustangs -General/Talk- Sep 13, 2026
Mcmahst
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
841
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
240
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
B
Engine Strange Noise
  • burntokita
  • May 8, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
553
Fox 5.0 Mustang Tech May 11, 2026
keel
N
Edelbrock 1405 Setup
  • nathantaylor200
  • Nov 4, 2025
  • Classic Mustang Specific Tech
Replies
3
Views
347
Classic Mustang Specific Tech Nov 5, 2025
nathantaylor200
N
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?