Turnsignals not working now!

[Musclecarfan88]

Well im having nothing but electrical problems with this car. it runs fine but my tach and alt gauges still arent working, still trying to find the problem to that. But my turnsignals arent working now. They used to work, till today... But when i turn the hazzards on they work. So whats my problem now?

 

[wshI_hd_1]

not 100% sure, but my dads car had the same promblem with his car, try lookin for a loose or faulty ground

 

[The Shape]

Could just be a bad flasher your turn signals use a different one than your hazzard lights do.

 

[Rerun]

I had the same problem, couldn't figure it out. One day I was pulling the dash out, noticed one of the wires in the back of the hazzard switch wasn't plugged in. I plugged it in, fixed everything.

Dunno?

 

[ratrapp]

exactly i pulled my dash apart to fix a leaking heater core and i pulled a wire out of my hazard switch by accident.i replaced the turn signal stalk and flasher before i found the wire.keep in mind the hazards worked the entire time.

 

[Musclecarfan88]

thanks guys.

 

[cola8d8]

Like they said above, replace the flasher. It is a different one than the hazzards. I just pulled out my gauges, when reinstalled turn signals did not work. I pulled back out and replaced both indicator bulbs, reinstalled then it worked. Did not make sense to me but it works now.

 

[speed1972]

got the same problem here. turn signals don't work but hazards do. I tried replacing the flasher to no avail. Subscribing for new ideas

 

[HISSIN50]

check the multi function switch and wires for continuity (DMM).
good luck to all.

 

[88stangmangt]

mine went out not to long ago caused the headlights to go with it by-passed the turn signal switch headlights worked great. Re-placed the switch now all is well.