TV cable question

[STROKED_LX]

ive accdently lost the pin holding my TV cable to the throttle body, is there anywhere i can buy one. i tried ford dealer and searches everywhere and can not find it. my trans is a AOD

 

[TheBocSez]

Are you using a brass bushing? If so and you are refering to the metal clip that holds it in place, you should be able to pick on up from any parts store or hardware store. If all else fails, 50resto sells an new bushing for 6.00

 

[sgarlic]

Yea just go to Ace hardware and look by their screws and stuff for a drawer with hitch pins.. they have all sorts of different sizes for like 8 cents a piece.

 

[STROKED_LX]

Thanks guys ill try it. i was hoping to find the orginal clip that it had but i guess ill have to go aftermarket on that part.

 

[TheBocSez]

Are you using the metal bushing or the stock nylon gromett? I just bought a new nylon one from a dealership for 3.00.

 

[FzyBnyFeet]

Thanks guys ill try it. i was hoping to find the orginal clip that it had but i guess ill have to go aftermarket on that part.

Do not use the 50Resto stuff- it end up being like $12 for a washer and a cotter pin. Just go to your local tranny shop. They will give you one for about $1.00, and it works better.

 

[STROKED_LX]

TheBocSez it was the orginal metal clip that came on there. the Dealer told me they had no part number for it.

FzyBnyFeet ya ill probly have to make my own custom clip.

 

[sgarlic]

All the stock piece is is a hitch pin, just like you get at Ace.