• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

twEECer anyone?

  • Thread starter Thread starter Funanin
  • Start date Start date Nov 13, 2004

Funanin

Founding Member
Nov 26, 2001
356
0
0
Horsham, Pennsylvania
Nov 13, 2004
#1
  • Nov 13, 2004
  • #1
ok, i am looking into getting the tweecer RT and obviously on their website all you hear and see is good things about it, but i was wondering if anyone on here has it and if it works as well as they say it does? (is it worth $550). Also, does it have to stay on the EEC itself, or do u only use it to tune it, then take it off? In other words, could i use it to do tunes on my friends cars as well or just mine? If so, would it work on newer EEC's? Obviously it works on EECIV but will it work on EECV and some of the other models such as my moms 03 explorer or my brothers 99 cobra?
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Nov 13, 2004
#2
  • Nov 13, 2004
  • #2
Do a thread search for tweecer. Much of what you're asking was recently covered in another thread. It can only be used on one car at a time and you can only tune the car that it is installed on. Once you remove the tweecer, you'll be back to your stock computer. It does NOT reprogram or burn your computer. Rather, it makes changes to the data going into and coming out of your factory computer.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Nov 13, 2004
#3
  • Nov 13, 2004
  • #3
Check out the 94/95 section...they have some threads on this...mainly because their computers are "less forgiving" than ours our...

Good Luck
 
8

87gtconv

ragtopman
Founding Member
Feb 11, 1999
2,595
0
0
Southern Calif
Nov 14, 2004
#4
  • Nov 14, 2004
  • #4
To the best of my knowledge, this is the only product that can be used to reprogram an SD car.
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Nov 14, 2004
#5
  • Nov 14, 2004
  • #5
87gtconv said:
To the best of my knowledge, this is the only product that can be used to reprogram an SD car.
Click to expand...

Noooooooooo. There are lots of them out there. Many can be had with newer Bar Map sensors that will handle both Vac and Boost readings. If I had nothing but money, I'd be putting some of it into the AEM system. Damned nice system with lots of versatility and supposedly relatively easy to program. It's a whopping $1600 though. *choke*
 
G

gt90stang

New Member
Dec 7, 2002
568
0
0
Nov 14, 2004
#6
  • Nov 14, 2004
  • #6
Funanin,

Yes, I have one on my NA 306. Without it my idle surged like crazy and didn't have full power. After tweeking and using a wide band AFR meter it now runs great with max power. The down side is that you must study study and study to learn how to use it. It is a large investment in time and $ but I think it is worth it because it solved all my driveability and power issues, of course with my help and documentation of others.

Good Luck, Don
 
B

BaXTeR3221

Member
Jan 12, 2004
917
0
16
Orange County, NY
Nov 14, 2004
#7
  • Nov 14, 2004
  • #7
I would invest in one, but everything i want it for requires also having a wideband o2, which is more money. So i'm thinking at that point, a dynotune and a chip is cheaper.
 
You must log in or register to reply here.

Similar threads

G
Fox Looking for old Hypertech part
  • GOvert
  • Jun 4, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
587
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 11, 2025
gkomo
P
Air Fuel ratio bung location.
  • Praetorious
  • Feb 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
39
Views
836
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 11, 2026
Noobz347
S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
Progress Thread The Mach Returns - Update/build thread
  • squeak93
  • Feb 20, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
252
1996 - 2004 SN95 Mustang -General/Talk- Jun 1, 2026
squeak93
Engine Information that is Needed When You Post a "Car is not Running" or "Car is Running Poorly" Thread
  • AeroCoupe
  • Apr 28, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
29
Views
1K
Fox 5.0 Mustang Tech May 4, 2025
Bullitt347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?