Tweecer just came in :)

Darek78 · Aug 31, 2005

hi guy's i just recived my new toy
but all i got was the chip and 2 wires and the swich but no software for that price they can't even give you a program cd
i will install it over the weekend see how it would do
plus will it work with windows XP home edition???????????????
i have a loptop so i will need you'r answer on the window part
Can a tweecer fix my idle problems?????
My mood's are
Cobra intake ,BBK 70mmT-Body,BBK cold air kit (FENDER), 1.6 roller rockers, steeda #19 cam ,smog pump delete pulley, BBK short header's, Mac H pipe with hi flow cat's ,flowmaster cat back ,PRO 50 short shifter ,Fuel pressure regulator, BBK 190lph fuel pump
the only problem i have is with the cam when i start my car in the morning idles nice and you can here that is camed but when it worms up and i start driving and i come to a stop my RPM's Go up and down up and down and they stop apter few seconds and some times when they go up they drop all the way down and the car stall's
and deppend's on the day to some time's its runs good and some time's i get the problem when it's running all day and i shut it of and put it back on then doe's the same thing keep's surgeing
so i need to knoiw if there is a option i Tweecer to make that go away

Thank's
Darek.N

Zero Signal · Aug 31, 2005

Yeah you need to download everything. Remember to install BDE before trying to install the STKR programs! It will work with WinXP no problem. You should already have the USB driver so you'll be fine.

For your idle problems, I suggest buying EEC Analyzer. I bought it and it's well worth the $50, trust me! I usually get my tune 90% down after the first run through that program. But for the first time around, if you send me a datalog with the right payload I can try to help with the tune if you like. Just PM me.

Darek78 · Aug 31, 2005

ok thanks for the help but i'm new to the tunning thing and all the program's that you said i have no clue abaut what and were and how

Thanks
Derek.N

Zero Signal · Aug 31, 2005

First step is to get it up and functioning properly. That seems to be a task in and of itself for alot of people so do that first then start getting into it.

Darek78 · Aug 31, 2005

thanks i will do my best if i have a Q i will try to PM you
plus befor i start changing thing's i can allway go back to stock setting????

thanks
Darek.N

Zero Signal · Aug 31, 2005

Yeah you can turn the thing off completely by turning the knob full clockwise.

blksn955.o · Sep 1, 2005

Take your time, things will fall into place just not over night.

I to would recoment the eec annalizer program pure gold.

Also check out the tweecer forums at http://eectuning.org/forums and use the search function its your new best friend.

94GTLaserRC · Sep 1, 2005

What is the EEC analyzer program?

When I installed mine, I put a shim in between the empty space and the connection to keep it from moving around when I install it. Then, I wrapped some duct tape around it.. So far so good.

RC

final5-0 · Sep 1, 2005

94GTLaserRC said:
What is the EEC analyzer program?

Here is a link RC http://eecanalyzer.webhop.net/

It is a very big help indeed

When I installed mine, I put a shim in between the empty space and the connection to keep it from moving around when I install it. Then, I wrapped some duct tape around it.. So far so good.

RC

Me too!

You can fix anything with duct tape or JB Weld

Later
Grady

94GTLaserRC · Sep 2, 2005

Thanks Grady...

blksn955.o · Sep 2, 2005

I used part of the box the tweecer cam in as a wedge to keep the tweecer level on the eec otherwise it is kinda un-even, then used good amount of black duc tape. I am preaty sure if I flip end over end, roll many times, and hit a wall at over 100mph the tweecer will still be attached to the eec.

CManT1914 · Sep 2, 2005

blksn955.o said:
I used part of the box the tweecer cam in as a wedge to keep the tweecer level on the eec otherwise it is kinda un-even, then used good amount of black duc tape. I am preaty sure if I flip end over end, roll many times, and hit a wall at over 100mph the tweecer will still be attached to the eec.

Yea and even if it didn't, the twEECer would be the least of your concerns.

Tweecer just came in :)

Darek78

Member

Zero Signal

Active Member

Darek78

Member

Zero Signal

Active Member

Darek78

Member

Zero Signal

Active Member

blksn955.o

94GTLaserRC

Squint as you approach, lest you be blinded by my

final5-0

Mustang Master

94GTLaserRC

Squint as you approach, lest you be blinded by my

blksn955.o

CManT1914

New Member

Similar threads

Tweecer just came in :)

Member

Active Member

Member

Active Member

Member

Active Member

Squint as you approach, lest you be blinded by my

Mustang Master

Squint as you approach, lest you be blinded by my

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency