I am selling a Tweecer RT. Made in TEXAS! $350
I highly suggest referring to these link before purchasing.
The TwEECer -- EEC-IV user programmable module
EECTuning.org • Index page
I also have an A9P mass air computer. This is originally for an auto car, but I have had a 5 speed since I have owned the car without any issues. $200
FYI, the Tweecer RT is a piggy back style tuning device that plugs into your factory computer. It has a USB cord that you plug into your laptop. With the Cal Con and Cal Edit software, you are able to tune your car on the fly as well as record data logs and even allows the use of an aftermarket wideband setup. With the Tweecer RT, there is no need to buy a pre-calibrated mass air meter. You can program your own MAF curve, injector size, advance or retard timing vs. RPM, set fuel pressure vs. RPM, set A/F ratio and go. This is one of the most popular tuning devices available for Foxbody and SN95 Mustangs, but it can be used with any 1984-2004 Ford vehicle.
Located in Houston but i will ship!
guy.steiger@yahoo.com
I highly suggest referring to these link before purchasing.
The TwEECer -- EEC-IV user programmable module
EECTuning.org • Index page
I also have an A9P mass air computer. This is originally for an auto car, but I have had a 5 speed since I have owned the car without any issues. $200
FYI, the Tweecer RT is a piggy back style tuning device that plugs into your factory computer. It has a USB cord that you plug into your laptop. With the Cal Con and Cal Edit software, you are able to tune your car on the fly as well as record data logs and even allows the use of an aftermarket wideband setup. With the Tweecer RT, there is no need to buy a pre-calibrated mass air meter. You can program your own MAF curve, injector size, advance or retard timing vs. RPM, set fuel pressure vs. RPM, set A/F ratio and go. This is one of the most popular tuning devices available for Foxbody and SN95 Mustangs, but it can be used with any 1984-2004 Ford vehicle.
Located in Houston but i will ship!
guy.steiger@yahoo.com