Uneven tail pipes

mcalvo · Oct 11, 2023

Gentlemen;
I got a problem backing up at a parking lot. I hit one of the sidewalks and now I got an uneven tail pipe.

The dirver side is significatly more inwards under the body. Would I be able to pull it out to make it even? Thanks in advanced

Kid wita 5oh · Oct 12, 2023

Replace the hanger that's ripped in half....

Noobz347 · Oct 12, 2023

Kid wita 5oh said:
Replace the hanger that's ripped in half....

^This^

General karthief · Oct 12, 2023

If in fact it did push the pipes forward, and I'd suspect it did, you will have to find the area of the pipe that bent, depending on where and how bad the kink is will dictate what has to happen. That short a distance it may pull back, or it may bend someplace else.
Likely kinked at the curve over the rear axle.

Noobz347 · Oct 12, 2023

General karthief said:
kink is will dictate what has to happen

If your CT wasn't so damned good already...

Mustang5L5 · Oct 13, 2023

Walker 35637 exhaust hanger. You can sometimes find these at your local parts store

Amazon product ASIN B0019I68XA

revhead347 · Oct 13, 2023

That exhaust pipe looks like an abnormal penis from the 90s pron we watched in college.

Kurt

Noobz347 · Oct 13, 2023

What's the rest of the car look like? It might be time for some shiny new straight pipes.

mcalvo · Oct 16, 2023

Noobz347 said:
What's the rest of the car look like? It might be time for some shiny new straight pipes.

Very good point

mcalvo · Oct 16, 2023

Noobz347 made a good point about changing the exhaust. I have looked at a video some time ago. I want to get your expertise. The link for the video is here. .

My questions are X-Pipe or H-pipe? 2.5 or 3 inch ? On the video I only see 1 set of catalytic converters. The current setup in the car are 2 sets of cat converters. Would only 2 work for passing emissions?

Once again thank you for your opinion and expertise.

Noobz347 · Oct 16, 2023

If you're planning more mods, I'd do Long tubes and 3".

You need to check with PA about what they will accept. CA, for instance, will have 4-cats if the car came with them. Other states allow t hose 3-way converters like in your image above.

If PA requires you have all 4 cats, your options are usually limited to axle-back exhaust systems.

General karthief · Oct 16, 2023

Look for a CARB certification number, is there emissions inspections there?

mcalvo · Oct 16, 2023

Noobz347 said:
If you're planning more mods, I'd do Long tubes and 3".

You need to check with PA about what they will accept. CA, for instance, will have 4-cats if the car came with them. Other states allow t hose 3-way converters like in your image above.

If PA requires you have all 4 cats, your options are usually limited to axle-back exhaust systems.

Thank you for you input.I live in AZ and I will look into emissions requirements.

mcalvo · Oct 16, 2023

Mustang5L5 said:
Walker 35637 exhaust hanger. You can sometimes find these at your local parts store

Amazon product ASIN B0019I68XA

Thank you for your input. I got a pair of those at the local autozone in Az.

mcalvo · Oct 16, 2023

revhead347 said:
That exhaust pipe looks like an abnormal penis from the 90s pron we watched in college.

Kurt

LOL... I rescued/bought the car from a gang member in south Phoenix about 10 years ago. As you can see he did his own mods that now I am undoing.

Noobz347 · Oct 17, 2023

mcalvo said:
Thank you for your input. I got a pair of those at the local autozone in Az.

I'm not sure where I got PA from.

nickyb · Oct 17, 2023

You got PA from that dirty hooker who gave you VD

General karthief · Oct 17, 2023

nickyb said:
You got PA from that dirty hooker who gave you VD

And the fight starts
He will tell you " that hooker wasn't dirty".

mcalvo · Oct 20, 2023

General karthief said:
And the fight starts
He will tell you " that hooker wasn't dirty".

LOL!!!

mcalvo · Oct 20, 2023

General karthief said:
And the fight starts
He will tell you " that hooker wasn't dirty".

LOL!!!

Uneven tail pipes

Member

I'm definitely not in the original hole

Stangnet Facilities Maint Tech... Er... Janitor

wonder how much it would cost to ship you a pair

Stangnet Facilities Maint Tech... Er... Janitor

That is…until I whipped out my Bissell

Apparently my ex-husband made that mistake.

Stangnet Facilities Maint Tech... Er... Janitor

Member

Member

Stangnet Facilities Maint Tech... Er... Janitor

wonder how much it would cost to ship you a pair

Member

Member

Member

Stangnet Facilities Maint Tech... Er... Janitor

I gotta say i never painted my nuts, Never Ever

wonder how much it would cost to ship you a pair

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency