Upgrades for a 331

Geezer1

New Member
Jun 2, 2009
1
0
0
Hi,

Hi I am new here, but I have had several mustangs over the years. My first was a new 1965, since then I have had another 1965, a 1979 turbo, 1986 GT, 1995GT and now a 1992 LX convertible that I have had for about six weeks. My question concerns my current car. The engine is a 1987 or 1988 that has been taken out to 331cu in. It has BBK shorty headers, 1" lowered suspension, strut tower brace, BBK strut adjusters, new adjustable clutch cable, 3.73 rear end and a T-5 trans, 2.5 in exhaust with "H" pipe. The heads look to be stock and I think the cam is also (if not it is mild), it is a non MAF, and has the stock air intake. The car actually runs quite well right now, has lots of torque, but of course always after more power. I am looking for suggestions for an intake manifold, injectors, throttle body, etc. I realize that the heads and cam should be changed out but at 62 years old I am getting too lazy and cheap for that stuff. It will be used a street car.

Any suggestions would be appreciated.

Thanks
Geezer1