• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Upper Control Arms

  • Thread starter Thread starter DocG
  • Start date Start date Oct 7, 2008

DocG

5th graders > me. They're not bant
Sep 25, 2005
8,297
1,358
194
Cincinnati area
Oct 7, 2008
#1
  • Oct 7, 2008
  • #1
Would there be any reason why my Stang would no longer have rear upper control arms? It has a panhard bar, sway bar, rear strut tower brace, MM lower controls and a torque arm. I don't seem to notice anything odd in the handling....are they just unnecessary with the other work on it, or should I be getting these back on right away??


Thanks!
 

strtrcr50

New Member
Jun 21, 2006
0
4
0
Previously from Dirty Jerzey exit 7a
Oct 7, 2008
#2
  • Oct 7, 2008
  • #2
Upper contol arms bind and are a compromise. With your setup, you no longer need them.
 

Dino Dino Bambino

15 Year Member
Jun 13, 2007
1,673
90
79
Cyprus
Oct 7, 2008
#3
  • Oct 7, 2008
  • #3
With a torque arm to control pinion angle and a panhard bar to laterally locate the rear axle, you definitely DON'T need the upper control arms. Your suspension set-up is excellent.
 

DocG

5th graders > me. They're not bant
Sep 25, 2005
8,297
1,358
194
Cincinnati area
Oct 7, 2008
#4
  • Oct 7, 2008
  • #4
strtrcr50 said:
Upper contol arms bind and are a compromise. With your setup, you no longer need them.
Click to expand...

Bullitt95 said:
With a torque arm to control pinion angle and a panhard bar to laterally locate the rear axle, you definitely DON'T need the upper control arms. Your suspension set-up is excellent.
Click to expand...


Thanks fella's! This is kinda what I figured, but wanted to verify.

Its pretty darn solid. It will rattle fillings loose and I don't think there is one tight piece of trim left on the interior. Now if I could just fix the fender rubbing issues, I'd be a happy camper.
 
You must log in or register to reply here.

Similar threads

Suspension Harsh Ride
  • PonyGTrider
  • Mar 20, 2026
  • Fox 5.0 Mustang Tech
  • 2 3 4
Replies
62
Views
3K
Fox 5.0 Mustang Tech Apr 11, 2026
Noobz347
Front Coil Overs and Rear Traditional Springs within a Maximum Motorsports K-Member Kit
  • Habu135
  • Sep 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
965
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 9, 2026
Habu135
New Products From J&M Products - 1979-1998 & 1999-2004 Race/Extreme Duty Rear Lower Control Arms
  • J&M Products
  • Oct 9, 2025
  • Vendor Sponsor Forums
Replies
0
Views
472
Vendor Sponsor Forums Oct 9, 2025
J&M Products
Progress Thread 91GTstroked 90 7 up convertible build
  • 91GTstroked
  • Apr 18, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
472
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 22, 2026
91GTstroked
R
Rear Upper Control Arm Pivot Point
  • Rcdgl
  • May 10, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
225
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 10, 2025
Rcdgl
R
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?