UPR X sound clips?

S

sixstringthing

New Member

Aug 11, 2003

297

0

0

Jun 22, 2004

#1

• Jun 22, 2004

• #1

Anyone have sound clips of a UPR X with flows? I hear it actually sounds really good for an X pipe and barely rasps at all.... never found a sound or video clip though.

 

RIP 112

New Member

Apr 19, 2004

142

0

0

Round Top, Texas

Jun 22, 2004

#2

• Jun 22, 2004

• #2

I don't have a clip, but from my experience, I actually like it. I run the same setup you described. It's loud, extremely loud at 2 grand, but quiets out going past 2500, then the engine takes over. I've gotten nothing but compliments about how good it sounds. Makes me proud. When I start it up in the morning, I can feel the rumble on the ground from 10 feet away. It's a keeper....

 

Milenko

Skid Mark Layer...only not fro

Founding Member

Nov 5, 2001

462

1

19

Boston, MA

Jun 22, 2004

#3

• Jun 22, 2004

• #3

Interested as well..bump.

 

03-s281

New Member

Jan 20, 2004

421

0

0

Stangville,TN

Jun 22, 2004

#4

• Jun 22, 2004

• #4

A buddy has o/r x and flowmaster catback on his 00' and it sounds wicked.
I may switch.
At idle and at low rpms his sounds better. And up top mine sounds louder.

 

S

sixstringthing

New Member

Aug 11, 2003

297

0

0

Jun 22, 2004

#5

• Jun 22, 2004

• #5

Awesome, so how does it sound inside with the UPR? Do you hear any rasp? I drove a car with flows and an X once and the tone was killer but damn, when you got on it it made this LOUD metallic scratching type sound, it was louder than the exhaust note. The thing is I don't know what type of X it was, might have been chambered.

 

decoy562

New Member

Oct 9, 2003

1,526

0

0

Acworth, GA

Jun 23, 2004

#6

• Jun 23, 2004

• #6

Did you check www.mustangexhaust.com for sound clips?

 

Ryan02Stang

Active Member

Jun 17, 2003

1,181

0

36

Arlington Heights, Illinois

Jun 23, 2004

#7

• Jun 23, 2004

• #7

I have a soundclip of my car on a tape...but I can't get in on the computer. I have UPR offroad X pipe with 2 chamber flows and it sounds AWESOME. No rasp at all, extremely deep sounding for an X pipe, and wakes up the neighbors everytime i come and go. I get compliments ALL the time.

 

Aurora85

New Member

Feb 5, 2003

34

0

0

Auburn University, AL

Jun 23, 2004

#8

• Jun 23, 2004

• #8

I've been looking into buying one because the price cant be beat! When delivered did it come with all the necessary parts? Also I dont plan on installing it myself as I dont have any tools here at college, but how much would you guestimate that it would cost to be put on at a local exhaust shop? Thanks!

 

STL00GT

New Member

Mar 9, 2004

49

0

0

Saint Louis

Jun 23, 2004

#9

• Jun 23, 2004

• #9

I will try to get some sound clips up tonight. I have all the tools to put sound clips up quickly.

If you have it installed it should be under $100. The install is simple for someone at a local exhaust shop that has a lift. It wouldn't even take them an hour. All the parts are included with the pipe.

I have this midpipe with MAC Stainless Flowpaths and let me tell you it is loud. It is a very good sounding pipe even with factoy mufflers but when I put the MAC Flowpaths on it made it LOUD. There is no drone and it doesn't sound too raspy.

 

S

sixstringthing

New Member

Aug 11, 2003

297

0

0

Jun 23, 2004

#10

• Jun 23, 2004

• #10

bump

 

Aurora85

New Member

Feb 5, 2003

34

0

0

Auburn University, AL

Jun 23, 2004

#11

• Jun 23, 2004

• #11

STL00GT said:

I will try to get some sound clips up tonight. I have all the tools to put sound clips up quickly.

If you have it installed it should be under $100. The install is simple for someone at a local exhaust shop that has a lift. It wouldn't even take them an hour. All the parts are included with the pipe.

I have this midpipe with MAC Stainless Flowpaths and let me tell you it is loud. It is a very good sounding pipe even with factoy mufflers but when I put the MAC Flowpaths on it made it LOUD. There is no drone and it doesn't sound too raspy.

Click to expand...

id love to hear this setup! I would hope the install would be cheap as it doesnt seem like there is too much to it..I just dont have the necessary equip. to do it myself.

 

S

sixstringthing

New Member

Aug 11, 2003

297

0

0

Jun 23, 2004

#12

• Jun 23, 2004

• #12

Installs are usually pretty cheap, i got my prochamber installed for $4o. The tone of the PC is killer but it is too quiet for my tastes... which is why ive considered the UPR

 

RIP 112

New Member

Apr 19, 2004

142

0

0

Round Top, Texas

Jun 23, 2004

#13

• Jun 23, 2004

• #13

Mine does make a rasp, but I have an automatic, and the ratios are weird. It's very anxious to get into 4th gear before it uses 3rd up, so when the rpms are low, I would say yes, it is raspy. It's like turbos mounted right in front of the mufflers, and some dumbass might mistake it for that. But like I said, it's a keeper.....and it's loud when the engine is cold. When you get it done, stand in the back of the car and get a good whiff of exhaust. Oh BTW, your exhaust WILL smell different but that's normal because (?!) no CATS!!!

 

D

DerekStangGT

My package is in the mail!

Feb 18, 2003

1,068

0

36

Jun 23, 2004

#14

• Jun 23, 2004

• #14

RIP 112 said:

When you get it done, stand in the back of the car and get a good whiff of exhaust. Oh BTW, your exhaust WILL smell different but that's normal because (?!) no CATS!!!

Click to expand...

i loooooove that smell. ode to the sweetness of burning fuel

 

GreekStang85

Member

Jun 11, 2003

485

0

16

Jun 23, 2004

#15

• Jun 23, 2004

• #15

can you put LT's on if you get a upr o/r x pipe?

 

D

DerekStangGT

My package is in the mail!

Feb 18, 2003

1,068

0

36

Jun 23, 2004

#16

• Jun 23, 2004

• #16

GreekStang85 said:

can you put LT's on if you get a upr o/r x pipe?

Click to expand...

if you can find a shop good enough to cut the upr and fab it up to the L/Ts, then yes

 

Steve777

New Member

Jun 21, 2004

208

0

0

Pittsburgh, PA

Jun 24, 2004

#17

• Jun 24, 2004

• #17

I have an SLP x-pipe with cats and Flows ...I love it ...I keep hearing "H for sound, X for performance" This is BS ...X-pipes paired with Flows give an even cleaner sound and a racier sound under acceleration. There is some rasp with the o/r pipe ...cats help clean it out. Another thing is - people not being pleased with the sound of an X probably aren't listening to their cars from the outside ...Mine sounds good inside, but outside is where it sounds the best.

X for sound, X for performance

 

Aurora85

New Member

Feb 5, 2003

34

0

0

Auburn University, AL

Jun 24, 2004

#18

• Jun 24, 2004

• #18

I have another question. If i'm to get this catless X pipe..am I going to need Mil eliminators? Sorry for the stupid question but i'm trying to learn here ha. Thanks

 

Milenko

Skid Mark Layer...only not fro

Founding Member

Nov 5, 2001

462

1

19

Boston, MA

Jun 24, 2004

#19

• Jun 24, 2004

• #19

Aurora85 said:

I have another question. If i'm to get this catless X pipe..am I going to need Mil eliminators? Sorry for the stupid question but i'm trying to learn here ha. Thanks

Click to expand...

Yes, you will.

Make them yourself though, costs 5 bucks instead of 60+

 

Aurora85

New Member

Feb 5, 2003

34

0

0

Auburn University, AL

Jun 24, 2004

#20

• Jun 24, 2004

• #20

What does it entail? I'm pretty much new to doing mods myself so if I were to go the route of buying the eliminators..do exhaust shops install those as well?