Allrighty, I was wondering if anyone knew of any online vacuum and/or intake routing diagrams? I finally have the Stang 5.0 (92) in my F-150 and 90% hooked up and such. Im just getting stuck on the vacuum and intake routing since they differ from my trucks old setup and I dont have access to a Mustang to get the routing off of. So.. if anyone has access to a diagram, or has any close up shots of a Stangs intake Id appreciate it.
My second question is in relation to the ECU and wiring I'm using. I'm just curious, How much, if any, power will I be losing by using my F-150's ECU over the Mustangs original setup? Its just curiosity really. Ive looked at the Stang harness and ECU I have but theres really no way in hell Im going to go through the wire splicing, cutting and modifying needed to make it work.. if it would at all.
Anyway, Thanks!
My second question is in relation to the ECU and wiring I'm using. I'm just curious, How much, if any, power will I be losing by using my F-150's ECU over the Mustangs original setup? Its just curiosity really. Ive looked at the Stang harness and ECU I have but theres really no way in hell Im going to go through the wire splicing, cutting and modifying needed to make it work.. if it would at all.
Anyway, Thanks!