Vaccuum Line, picture included

PhLoBuS

New Member

Aug 15, 2004

473

0

0

Beverly, MA

May 11, 2005

#1

• May 11, 2005

• #1

I just need to know where this vaccuum hose supposed to go. Do I even really need it? All the others are connected and I know this was connected before I took everything apart. Check the picture and let me know what you think.
Picture

 

Mike86Stang

Advanced Member

Apr 11, 2000

10,296

0

77

Red Lion, PA

May 11, 2005

#2

• May 11, 2005

• #2

It's for the emmissions solenoids. If you want you smog stuff to work yeah you need it.

 

jb89coupe

New Member

Sep 3, 2004

416

0

0

CT

May 11, 2005

#3

• May 11, 2005

• #3

It either goes to the EGR valve on the throttle body, or is one of the air system valve hoses, but it looks like those are both hooked up already.

EDIT: that's not a pic of your motor, haha.. well it's one or the other. There are 4 hoses that come from that fitting, 2 go down to the air pump valves and the other 2 are for the egr system - one goes to the egr valve itself and the other goes to the upper manifold vacuum tree.

 

5spd GT

"the 5.0 owns all"

Founding Member

Aug 7, 2002

9,516

6

99

Arkansas

May 11, 2005

#4

• May 11, 2005

• #4

Yeah I think the black one goes to the EGR valve on the throttle body as stated...it has a real obvious point of connection...

 

PhLoBuS

New Member

Aug 15, 2004

473

0

0

Beverly, MA

May 12, 2005

#5

• May 12, 2005

• #5

I know thats not mine I was too lazy to take a pic of my engine

 

PhLoBuS

New Member

Aug 15, 2004

473

0

0

Beverly, MA

May 12, 2005

#6

• May 12, 2005

• #6

I already have one on the EGR valve =[

 

jb89coupe

New Member

Sep 3, 2004

416

0

0

CT

May 12, 2005

#7

• May 12, 2005

• #7

PhLoBuS said:

I already have one on the EGR valve =[

Click to expand...

Well I told you where all four of them go.. follow the lines to where they lead into that four way fitting. You should have one red, one green, one black, and one white line.

red->upper intake manifold vacuum tree
green->egr valve
black/white->air pump valves (on the tube that leaves the air pump)

 

5spd GT

"the 5.0 owns all"

Founding Member

Aug 7, 2002

9,516

6

99

Arkansas

May 12, 2005

#8

• May 12, 2005

• #8

It looks like that black one goes to the back of your upper intake along with your fuel pressure (red) vacuum line. It goes right above it or below it depending on where your FP line is...

 

Umby

New Member

Mar 30, 2005

129

0

0

Atlanta, GA

May 12, 2005

#9

• May 12, 2005

• #9

Not to hijack the thread, but does anyone know where I can get a replacement for the 4 lines thats not old and brittle? When I was pulling off my heater hoses my pliers slipped and broke 3 of the 4 lines. I've currently got 'em patched together, but it looks like ass.

 

sgarlic

Founding Member

Apr 21, 2001

3,085

1

56

May 12, 2005

#10

• May 12, 2005

• #10

Mine did the exact same thing when I recently had the upper intake off. Like 2 or 3 broke.. I personally don't care, and don't notice a difference with them broken, so I just rtv'd the ends. I think a junkyard is your best bet.. I looked everywhere online with no luck.

 

PhLoBuS

New Member

Aug 15, 2004

473

0

0

Beverly, MA

May 12, 2005

#11

• May 12, 2005

• #11

Okay, I have a red line and a blackline going into my upper intake. and then I have one going from the firewall into it... is that correct?

 

jb89coupe

New Member

Sep 3, 2004

416

0

0

CT

May 12, 2005

#12

• May 12, 2005

• #12

PhLoBuS said:

Okay, I have a red line and a blackline going into my upper intake. and then I have one going from the firewall into it... is that correct?

Click to expand...

Yup, the red line should be coming straight from the fpr. The long black line should be coming from that vacuum fitting (it should be red before the fitting and black after). The big vacuum hose goes to the vacuum tree on the firewall (labeled S).

 

Umby

New Member

Mar 30, 2005

129

0

0

Atlanta, GA

May 12, 2005

#13

• May 12, 2005

• #13

sgarlic said:

Mine did the exact same thing when I recently had the upper intake off. Like 2 or 3 broke.. I personally don't care, and don't notice a difference with them broken, so I just rtv'd the ends. I think a junkyard is your best bet.. I looked everywhere online with no luck.

Click to expand...

Yep, it sucks. I'll probably leave it alone until I get around to re-doing the drivetrain sometime next year. I split mine down the middle and patched them together with windshield washer hose... it works.

 

5spd GT

"the 5.0 owns all"

Founding Member

Aug 7, 2002

9,516

6

99

Arkansas

May 12, 2005

#14

• May 12, 2005

• #14

jb89coupe said:

Yup, the red line should be coming straight from the fpr. The long black line should be coming from that vacuum fitting (it should be red before the fitting and black after). The big vacuum hose goes to the vacuum tree on the firewall (labeled S).

Click to expand...

Yes exactly...

I wish someone would have available or find a place that sells replacement vacuum lines...I would be the first to order