does any one have vac diagrams for the heat controls for an 87 mustang? I have a dangling black and yellow vac hose that is connected to the controls but I don't know where the other end is to go to
ok here are some stuff that might help you. you need to look for something like this. It is the silver canister thing. There are two of them. Don't mind the circle on the first one. That is what I am looking for.
The red arrow is the peace you looking for, the other one should be on the opposite side of the heater box closer to the drivers feet. I belive that is were they go.
The single black/yellow line goes to the actuator in the driver's foot well dash. It makes the air divert to come out the dash vents rather than the windshield and feet.
The single black/yellow line goes to the actuator in the driver's foot well dash. It makes the air divert to come out the dash vents rather than the windshield and feet.
makes sense because when you turn it to the panel vent function, it doesn't change from the windsheild and foot. Is it farely easy to see or will I have to dig for it? thanks for the advice.
The single black/yellow line goes to the actuator in the driver's foot well dash. It makes the air divert to come out the dash vents rather than the windshield and feet.