I am at a loss to make much of the diagram. I have been left with the 3 plugs in the picture, I believe 2 go in the manifold and 1 in the plenum but am unsure. If anyone can help it would be great. thankyou
Yes the two on the right go on the underside of the upper intake. The bottom left goes on the left rear corner of the lower to run water to the backside of the throttle body spacer.
This pic should help with you vacuum fittings.
aewsome! I drew a sketch of it before i took it all apart folded it up and put it inside but when I was porting i went through the bolt shoulder in the upper and took it out when it was welded and lost it