• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Vacuum Question

  • Thread starter Thread starter ponycrazy
  • Start date Start date Feb 19, 2004
P

ponycrazy

Member
Jan 26, 2004
40
0
6
Hillsborough, NJ
Feb 19, 2004
#1
  • Feb 19, 2004
  • #1
Hey i am installing a vacuum guage (I know serves no real purpose but got it free) and I hooked up the vacuum line to the air check valve. It works till the cars warms up a bit so my question is what is another vacuum line that is constant. I was thinking maybe the egr valve line?? Thanks for the help.
 

mustangdaren

Founding Member
Apr 21, 2002
605
0
0
Hildebran, North Carolina
Feb 19, 2004
#2
  • Feb 19, 2004
  • #2
There is an unused port on the vacuum tree (drivers side firewall) It has a cap on it.
 
P

PRO50SC

New Member
Dec 28, 2003
1,012
1
0
Olney, Maryland
Feb 19, 2004
#3
  • Feb 19, 2004
  • #3
mustangdaren said:
There is an unused port on the vacuum tree (drivers side firewall) It has a cap on it.
Click to expand...
Agree. Don't tap the egr line. You won't get any vacume at idle.
 
S

SmockDoiley

New Member
Jun 14, 2003
1,591
2
0
San Diego, CA
Feb 19, 2004
#4
  • Feb 19, 2004
  • #4
I hear Kirby makes a good vacuum, but they are expensive. My mom had an old one, but it weighed a ton. I think she switched to Oreck.
 

mustangdaren

Founding Member
Apr 21, 2002
605
0
0
Hildebran, North Carolina
Feb 19, 2004
#5
  • Feb 19, 2004
  • #5
I have a street driven Hoover vac but my mom's all out dragrace Electrolux vac will give your mom's Oreck a run for it's money, lol.
 
N

noslow5_0

New Member
Nov 7, 2003
422
0
0
dallas tx.
Feb 19, 2004
#6
  • Feb 19, 2004
  • #6
i dont know, my moms old "dusty" eureka sure puts up a hell of a fight..... pulls all the way through 12,000 rpm!!!
 

Deadlysniper

New Member
Feb 2, 2004
26
0
0
Feb 19, 2004
#7
  • Feb 19, 2004
  • #7
nice... lol. I have my vacuum running to a "T" fitting on the vac line that runs from the back of the intake over behind the passenger strut tower. It reads all the time, drops to zero when I hit it, since there is no vacuum. By the way, a vac gauge is more useful than you realize. When your car runs like crap, a drop in your vac gague will tell you when a leak is affecting driveability. It's saved me three times. Torn vac lines, vac lines popped off, etc. Saved me from trying to figure out what the problem is.
 
You must log in or register to reply here.

Similar threads

Mustang II 4 cyl gear hunting and possibly messed up vacuum system
  • oesterreicher
  • May 31, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
11
Views
318
1974 - 1978 Mustang II Talk & Tech Jun 14, 2026
manicmechanic007
D
Please help with vacuum lines
  • Dawgs000082
  • May 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
132
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 10, 2026
Dawgs000082
D
H
Engine 1987 5.0 HO vacuum hose locations
  • harryhaber
  • Jun 20, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
517
Fox 5.0 Mustang Tech Jun 21, 2025
limp
J
Emission problems
  • jls.zmmr
  • Feb 5, 2026
  • 1994 - 1995 Specific Tech
Replies
2
Views
248
1994 - 1995 Specific Tech Feb 7, 2026
AeroCoupe
Engine Vacuum reserve capacity question
  • Mcmahst
  • Apr 24, 2025
  • Fox 5.0 Mustang Tech
Replies
13
Views
467
Fox 5.0 Mustang Tech Apr 27, 2025
Mcmahst
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?