Valve Covers

[KcMstang]

Will these fit with a Cobra intake?

http://store.summitracing.com/partdetail.asp?part=FMS%2DM%2D6582%2DA301R&view=1&N=700+4294839018+4294908331+4294840126

:SNSign:

 

[GT_Rich]

I have those, but I'm using a 1/2" phenolic spacer and TW heads (which raise the valve cover height by 3/8"). They fit, but you won't be able to get a breather in the opening on the driver's side b/c of the plenum. I was able to put an oil fill plug there. Also, there's one or two protrusions on the inside that will need ground down. However, I'm running 1.72 RR's and I cleared the baffles. Hope that helps.

 

[BStevens]

i had the same issue i had to put a spacer on the intake for clearance on my valve covers.

 

[wythors]

The ones you've listed there are for a carb'd car. These are the ones you need and they'll work fine with a Cobra intake.