Valve Covers

KcMstang

Founding Member

Mar 26, 2001

1,563

0

36

Hamilton, Georgia

Mar 29, 2007

#1

• Mar 29, 2007

• #1

Will these fit with a Cobra intake?

http://store.summitracing.com/partdetail.asp?part=FMS%2DM%2D6582%2DA301R&view=1&N=700+4294839018+4294908331+4294840126

:SNSign:

 

GT_Rich

Member

Dec 11, 2005

172

0

17

North Canton, OH

Mar 29, 2007

#2

• Mar 29, 2007

• #2

I have those, but I'm using a 1/2" phenolic spacer and TW heads (which raise the valve cover height by 3/8"). They fit, but you won't be able to get a breather in the opening on the driver's side b/c of the plenum. I was able to put an oil fill plug there. Also, there's one or two protrusions on the inside that will need ground down. However, I'm running 1.72 RR's and I cleared the baffles. Hope that helps.

 

BStevens

Founding Member

Aug 28, 2001

127

0

16

Grand Rapids, MI

Mar 31, 2007

#3

• Mar 31, 2007

• #3

i had the same issue i had to put a spacer on the intake for clearance on my valve covers.

 

wythors

Get off my lawn!!!

Founding Member

May 17, 2000

2,277

35

69

C Addle

Mar 31, 2007

#4

• Mar 31, 2007

• #4

The ones you've listed there are for a carb'd car. These are the ones you need and they'll work fine with a Cobra intake.