• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Valve Train Noise Problem (Long)

  • Thread starter Thread starter wido78
  • Start date Start date Sep 9, 2005
W

wido78

Founding Member
Jan 24, 2002
217
0
0
Olathe, Ks
Sep 9, 2005
#1
  • Sep 9, 2005
  • #1
First of all, thanks for taking time to read this, as I am getting very frustrated...

I was preparing to put my car on the trailer for FFW this week and noticed some "clicking" coming from the engine bay. So, I looked around and "felt" around with my stethoscope (sp) and could hear the noise really bad under each valve cover and in the upper intake (loudest). The noise was a very quick and rythmic clicking, that increases with RPMs. At first I thought I had a couple of loose rockers or something, so I started checking for those to no avail... I then started looking at the rockers themselves and noticed that they were a little "far down" on from the center of the spring. After having someone else (mechanic) look at it, he thought I might have a push rod that was a little too long. Without the ability to really measure (although these are what the engine builder told me to buy...) I spoke to TFS and they tended to agree. So...I ordered a couple of shorter sets and put them in the car.

After setting the valve lash, I started the car back up and the noise was still there... I then decided to adjust the lash with the valve covers off and the car running. I was able to eliminate the noise from the passenger side, but not the driver's side. The noise doesn't seem to get quieter or louder when I make any adjustments on the driver's side.

Do you have any suggestions? I currently have the following setup:

331 Stroker w/ 19CC Dish Pistons
Trick Flow TW Heads
FMS X303 Cam - .542 Lift
6.75 Hardened Push Rods (previously had 6.85)
TFS 1.6 Stud Mount Roller Rockers

Any and all help is greatly appreciated. Thanks Chris.
 
You must log in or register to reply here.

Similar threads

H
1995 cobra engine noise help
  • Holt2010
  • Nov 8, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
54
1996 - 2004 SN95 Mustang -General/Talk- Nov 8, 2026
Holt2010
H
M
Bad starter?
  • mason5.0
  • Oct 6, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
241
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2026
General karthief
R
Fox Hydroboost conversion/proportional valve
  • RubyRedNotch
  • Jul 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
125
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 20, 2026
RubyRedNotch
R
D
Rockers, lash adjusters and timing: help with parts (4.6 2v)
  • dvigAtel
  • Nov 1, 2025
  • Other Auto Tech
Replies
0
Views
380
Other Auto Tech Nov 1, 2025
dvigAtel
D
Engine Valve and or rocker noise .....new to this but dont mind getting my hands dirty.
  • mustang matt 1993
  • Jun 29, 2024
  • Fox 5.0 Mustang Tech
Replies
16
Views
2K
Fox 5.0 Mustang Tech Jul 1, 2024
rednotch
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?