• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

very strange headlight problem

  • Thread starter Thread starter 92s
  • Start date Start date Mar 11, 2006
9

92s

New Member
Mar 11, 2006
4
0
0
Mar 11, 2006
#1
  • Mar 11, 2006
  • #1
was driving the other night, came home, went to go back out, and my headlights would not turn on. my rear lights, fog lights, parking lights and dash lights coem on, but no headlight

now the even stranger part is that the highbeams only work when i hold the switch, i cant click it to make it stay on. what in the hell is going on? im clueless
 

Blakthorn

Member
Jul 24, 2004
299
1
16
US
Mar 11, 2006
#2
  • Mar 11, 2006
  • #2
check my thread i had same problem - also do a search for "headlight" you will see alot of similar threads

http://forums.stangnet.com/showthread.php?t=621578
 
8

89white50

Member
Nov 16, 2004
440
1
18
central MA
Mar 11, 2006
#3
  • Mar 11, 2006
  • #3
Its your multifunction switch. I had this same problem, so i replaced the multifunction, and headlight switches to be safe.
 

rd

Founding Member
Jan 12, 2000
3,316
63
109
Ocean Springs MS
Mar 11, 2006
#4
  • Mar 11, 2006
  • #4
Should be either the multifunction switch or the headlight switch with the circuit breaker.

Strangely, my old Bronco had both lamps fail at the same time, but that's a long shot.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Mar 11, 2006
#5
  • Mar 11, 2006
  • #5
Dont forget to check the red/yellow (IIRC) wire that goes from the headlight switch to the MF switch. It can burn or the terminal backs out of the MF switch connector.

The flash-to-pass sources power from elsewhere than the headlight switch, which is why it still works.

Good luck.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Mar 11, 2006
#6
  • Mar 11, 2006
  • #6
A word of caution about multifunction switches is in order here. The multifunction switch (high/low beam, wiper, turn signals) are different for different years. 87-98 will work in any 87-89 car. The 90-93 switches only work in 90-93 cars. You can't put an early model switch in a late model car, nor can you put a late model switch in an early car.
 

sunil6784

Member
Mar 31, 2005
620
0
18
Boston, MA
Mar 11, 2006
#7
  • Mar 11, 2006
  • #7
I had the same problem, turned out to be the headlight switch. Worked one day, didn't the next. Yours sound like the MF switch though.
 
D

dec322

Member
Feb 11, 2006
401
2
16
Bham AL
Mar 13, 2006
#8
  • Mar 13, 2006
  • #8
When I got home yesterday, my parking lights would not turn off. If I pull the switch hard towards me it will but when I release it the lights come back on. I had to pull the fuse last night in order to save the battery.

Is this the headlight switch?
 

crazypete

All my crevices are greased.
Oct 22, 2004
930
4
18
Arlington, MA
Mar 13, 2006
#9
  • Mar 13, 2006
  • #9
Pull the headlight switch out. Punch out the 2 pins and open it up. Watch out cause 2 spring loaded balls will fall out (it's what gives the switch the click click effect). Now stare at the inside and it will become clear whats wrong. Usually, it just gets dirty but I have seen the metal parts inside come loose too.

When you are done, just push a nail into the loops to hold it together and viola, you have just serviced your lightswitch.
 
D

dec322

Member
Feb 11, 2006
401
2
16
Bham AL
Mar 13, 2006
#10
  • Mar 13, 2006
  • #10
crazypete said:
Pull the headlight switch out. Punch out the 2 pins and open it up. Watch out cause 2 spring loaded balls will fall out (it's what gives the switch the click click effect). Now stare at the inside and it will become clear whats wrong. Usually, it just gets dirty but I have seen the metal parts inside come loose too.

When you are done, just push a nail into the loops to hold it together and viola, you have just serviced your lightswitch.
Click to expand...


In one sense I am scared to listen b/c of the bottom of your car.

In another sense, I'm all over it b/c of your creativity and hilarious responses to everyone elses response to your car.

I'll pick #2
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Mar 13, 2006
#11
  • Mar 13, 2006
  • #11
Grab a new switch and when it comes, then you can do Greasy Pete's method - if you destroy the old switch, you have a new one anyhow. If it works, keep the old one as a spare.

I never replied to that thread - I am not sure I would have used grease like that, but I admire people who think outside the box and are creative. Seems to me that oddball stuff like that is what hot rodding/modifying cars is all about.
 

crazypete

All my crevices are greased.
Oct 22, 2004
930
4
18
Arlington, MA
Mar 13, 2006
#12
  • Mar 13, 2006
  • #12
HISSIN50 said:
Grab a new switch and when it comes, then you can do Greasy Pete's method - if you destroy the old switch, you have a new one anyhow. If it works, keep the old one as a spare.

I never replied to that thread - I am not sure I would have used grease like that, but I admire people who think outside the box and are creative. Seems to me that oddball stuff like that is what hot rodding/modifying cars is all about.
Click to expand...

Thanks dude. I didnt seem to get much support on that thread even though I'm pretty sure I found the end-all of undercoating.

As for the light switch, I have replaced 2 so far and when the third one went, I opened it up and it looks like there was some kind of grease on the inside that had gotten burned or dirty over the years. I wiped it all off so it was clean metal, flipped the switch shut and pushed 2 nails through the pin locations and have had a totally reliable paddle switch ever since.
 

Leeroy697

Founding Member
Nov 26, 2000
2,294
0
0
Detroit, Michigan
Mar 13, 2006
#13
  • Mar 13, 2006
  • #13
My F350 has a similiar problem. The only lights that work are headlight,turn signal, and brake. No dash and running lights. I think its the switch but that darn thing costs 110 from ford.
 
M

madmaxin22

New Member
Nov 9, 2005
22
0
0
Mar 13, 2006
#14
  • Mar 13, 2006
  • #14
those w/ GT's should do this. I burned up one multi switch and the harness and decided to do the fix. no problems at all yet and now can have fogs on w/ just parking lights....

http://www.corral.net/tech/maintenance/foglights.html
 
D

dec322

Member
Feb 11, 2006
401
2
16
Bham AL
Mar 13, 2006
#15
  • Mar 13, 2006
  • #15
crazypete said:
Thanks dude. I didnt seem to get much support on that thread even though I'm pretty sure I found the end-all of undercoating.
Click to expand...

Yeah, you didn't get much support and most of the people were jerks! The best part of the thread isn't your idea....its your integrity when attacked. The jokes kept me coming back to see what you would write. Well done!

Madmaxin22--Thanks for the site. I learn more stuff everyday!
 
You must log in or register to reply here.

Similar threads

B
68 headlights hot working
  • Butchd88
  • Aug 1, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
2
Views
174
1965 - 1973 Classic Mustangs -General/Talk- Aug 3, 2026
Butchd88
B
1
Electrical 1985 mustang gt Led conversion trouble
  • 1985fox
  • Jan 5, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
849
Fox 5.0 Mustang Tech Jan 15, 2026
1985fox
1
J
Electrical problem with headlights
  • jeremykrell308
  • Oct 22, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
417
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 3, 2025
General karthief
A
SN95 Multifunction Madness! Need some big brain assistance from you folks
  • Awnaw
  • Oct 28, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
140
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 10, 2026
AeroCoupe
M
Need help!
  • Masonevans726
  • Dec 17, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
319
1996 - 2004 SN95 Mustang -General/Talk- Dec 17, 2025
Masonevans726
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?