• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

vibration after head gasket fix

  • Thread starter Thread starter valdre331
  • Start date Start date Nov 4, 2007

valdre331

New Member
Dec 6, 2006
15
0
0
Nov 4, 2007
#1
  • Nov 4, 2007
  • #1
hello i wondering if anyone can help me out. i blew a head gasket a few weeks ago. i replaced it, now the car has a very hard time starting. i have to hold the gas down to keep the rev to at least 2000 rpm. when it start to warm up the car then idle fine. i can see that i have a vaccum leak, and the car smell like fuel. it also vibrates when i give it a little gas. at idle it seem fine, but at 2000 or more its got this strange vibration. nothing violent, just a little. i wondering if i minght have bent a rod when i blew the head gasket. any help would be appriciated. i can't think of anything else right now that would help give an idea of what it is. if you guy can think of question to help figure out what it would be just ask. thanks
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
Nov 4, 2007
#2
  • Nov 4, 2007
  • #2
The most common problem i have had was the intake to head gaskets getting a little off. but if you are sure all of your gaskets are seald properly check all vaccum lines for proper connection and make sure they are not cracked or broken.

here is a diagram you can use to trace all of your lines. hope this helps.

 

Attachments

  • 88Stang5.0Vacuum.gif
    14.3 KB · Views: 180

valdre331

New Member
Dec 6, 2006
15
0
0
Nov 4, 2007
#3
  • Nov 4, 2007
  • #3
do you think that the vibration, and hard start could be cause by that? when i rev and let the rev come back down its kinda sound like something is unbalanced.
 

Blandnuts

I don't swallow; I only swoosh
Founding Member
Aug 21, 2000
1,172
124
124
FloorDuh
Nov 4, 2007
#4
  • Nov 4, 2007
  • #4
I would run a compression and leakdown test. What caused the blown headgasket? Was the head milled?
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Nov 4, 2007
#5
  • Nov 4, 2007
  • #5
If you have a vacuum leak, get that resolved first before trying to chase down any other issues. That could very well be the only problem if the leak is bad enough.
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Nov 4, 2007
#6
  • Nov 4, 2007
  • #6
firing order correct
 

valdre331

New Member
Dec 6, 2006
15
0
0
Nov 4, 2007
#7
  • Nov 4, 2007
  • #7
i checked the firing order, i have not done the compression test yet. the car at a friend house so i have to haul the tools there. the gasket blew cause i think the heads were over torgue. i have a shop build the engine for me, and i think they over torgue the head bolts. it also might have also been that it lean out at high rpm. i can't really tell cause when i opened it up the gasket got messed up. i did have the heads check to make sure they were still straight with out crack. i think that the vaccum leak is cause the lower intake did not sit right. before the i have 20 in of vac. now its about 8in.
 
You must log in or register to reply here.

Similar threads

N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
735
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
598
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
382
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
595
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
G
Idle surging after warm up
  • GALLY3309
  • Jun 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
255
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 10, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?