Victor Jr. setup

X302LX90X

New Member
Oct 25, 2005
29
0
0
Besides my current setup, I have a pair of brand new Victor jr. heads. How well do these heads perform? I am still sending them out to get further ported as well. I am building a 347, stroker. I wanted to know how these compare to Trickflow High Port heads.
 
I am building a 351w with Victor Jrs., 12.6 to 1 comp., victor intake, and 750 carb. I was told that this combination is barely enough to utilize these heads in "out of the box" form. I was told that these heads or more for bigger cube, high comp. or boost, high reving small blocks..................but I'm using them anyway, they leave room to grow.
 
The Jr's out of the box will outflow a set of box stock Hi-ports. But have the Hi-ports stage 3 ported and the Jr's stage 3 ported, they flow about the same.

Hi-ports with a power adder have been deep into the 8's in a SBF. Either head is a great head for a 347 stroker.

what intake and cam u running?
 
i would say go with the vic jr. that being said i see it posted all the time that out of the box vic jr's do not flow what mr edelbrock says they do. Maybe he shouldn't put his name to em. since you are getting em ported i suppose this is not a big deal to you.
 
If I decide to keep my car fuel injected I will continue to use the Holley Systemax II that I got. I think it should work well especailly if I go low CR with a blower. I'll probably need 42lb injectors or better with that too. I'm not sure yet, Should I go custom grind? or a Extreme Energy cam?
 
The Holley Systemax 11 is a great intake. Have it port matched to the heads.

Ur other options r AFR 205 race head or the new TFS TW track heat cnc'd 205 head from Summit.

Comp cam XE282HR or Comp has new stroker HR cam.

U could also go custom cam from FTI or Jay Allen.

I would go 9:1 flat top or dish piston.
 
X302LX90X said:
If I decide to keep my car fuel injected I will continue to use the Holley Systemax II that I got. I think it should work well especailly if I go low CR with a blower. I'll probably need 42lb injectors or better with that too. I'm not sure yet, Should I go custom grind? or a Extreme Energy cam?
Comp XFI :nice: