victor5.0 intake owners...

[mikepotts]

just curious what everyone else has done to handle their PCV or crankcase evac. duties???

 

[90lxcoupe]

-12 fitting on the VC with a line to the catchcan. N/A or boosted?

 

[mikepotts]

-12 fitting on the VC with a line to the catchcan. N/A or boosted?

right now im N/A, im supposed to be getting a small vortech this weekend.

 

[90lxcoupe]

my builder told me that one line from each valve cover is standard on blower/turbo motors, and N/A stuff you can get away with on line

 

[mikepotts]

my builder told me that one line from each valve cover is standard on blower/turbo motors, and N/A stuff you can get away with on line

thanks, what are you using for a pump? i had considered an electric smog/vacuum pump...

 

[90lxcoupe]

no pump, i just made a plug for the back of the intake, what i have is just like having a push in breather but it is safer, the push in ones fall out and if you dont catch them they can start fires, they will land right on the header. Happend to me a couple times at the track launching hard, if i happend on the street it definitly would have gone un-noticed and possibly been a big problem

 

[mikepotts]

i wonder what everyone else has done... surely we arent the only 2 people who have had t address this issue...

 

[dragin92gt]

i just run a custom made v/c cap and soderd and pcv grommett on it, thats on the drivers side, pass side just has a angle plastic piece that runs to a y that connects the drivers side and pass side, then goes to the stock thingy ma hopper on the throttle body



KINDA HARD TO EXPLAIN IT LOL

 

[mikepotts]

i just run a custom made v/c cap and soderd and pcv grommett on it, thats on the drivers side, pass side just has a angle plastic piece that runs to a y that connects the drivers side and pass side, then goes to the stock thingy ma hopper on the throttle body



KINDA HARD TO EXPLAIN IT LOL

i hear ya man, is there any way we can get a pic?