victor5.0 intake owners...

mikepotts · Dec 4, 2009

just curious what everyone else has done to handle their PCV or crankcase evac. duties???

90lxcoupe · Dec 4, 2009

-12 fitting on the VC with a line to the catchcan. N/A or boosted?

mikepotts · Dec 4, 2009

90lxcoupe said:
-12 fitting on the VC with a line to the catchcan. N/A or boosted?

right now im N/A, im supposed to be getting a small vortech this weekend.

90lxcoupe · Dec 4, 2009

my builder told me that one line from each valve cover is standard on blower/turbo motors, and N/A stuff you can get away with on line

mikepotts · Dec 4, 2009

90lxcoupe said:
my builder told me that one line from each valve cover is standard on blower/turbo motors, and N/A stuff you can get away with on line

thanks, what are you using for a pump? i had considered an electric smog/vacuum pump...

90lxcoupe · Dec 4, 2009

no pump, i just made a plug for the back of the intake, what i have is just like having a push in breather but it is safer, the push in ones fall out and if you dont catch them they can start fires, they will land right on the header. Happend to me a couple times at the track launching hard, if i happend on the street it definitly would have gone un-noticed and possibly been a big problem

mikepotts · Dec 4, 2009

i wonder what everyone else has done... surely we arent the only 2 people who have had t address this issue...

dragin92gt · Dec 4, 2009

i just run a custom made v/c cap and soderd and pcv grommett on it, thats on the drivers side, pass side just has a angle plastic piece that runs to a y that connects the drivers side and pass side, then goes to the stock thingy ma hopper on the throttle body

KINDA HARD TO EXPLAIN IT LOL

mikepotts · Dec 5, 2009

dragin92gt said:
i just run a custom made v/c cap and soderd and pcv grommett on it, thats on the drivers side, pass side just has a angle plastic piece that runs to a y that connects the drivers side and pass side, then goes to the stock thingy ma hopper on the throttle body

KINDA HARD TO EXPLAIN IT LOL

i hear ya man, is there any way we can get a pic?

victor5.0 intake owners...

mikepotts

Member

90lxcoupe

mikepotts

Member

90lxcoupe

mikepotts

Member

90lxcoupe

mikepotts

Member

dragin92gt

New Member

mikepotts

Member

Similar threads

victor5.0 intake owners...

Member

Member

Member

Member

New Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency