• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

video inside. . .

  • Thread starter Thread starter JungleJoe
  • Start date Start date Aug 20, 2011

JungleJoe

I was like well chit..Im missing something
Jul 25, 2011
184
7
18
Mo.
Aug 20, 2011
#1
  • Aug 20, 2011
  • #1
Finally was able to have a buddy get a vid of my car on the "monster cam sound"... what you guys think it could possibly be? It will do this EVERY time you start it no matter what...


005.AVI - YouTube
 

JungleJoe

I was like well chit..Im missing something
Jul 25, 2011
184
7
18
Mo.
Aug 21, 2011
#2
  • Aug 21, 2011
  • #2
I took out the old ACT sensor, looked lik eit had dried tar on it....so I bought a new one put it in, still doing it..Just wondering, is it possible for the lower intake to be gummed up and stopping air flow some how? Seems like its doing this until it goes to closed loop, then the computer is doing its job to pull some fuel out of it...
 

Attachments

  • @.webp
    4.1 KB · Views: 138

darthcual

Member
Mar 31, 2005
985
19
18
Arlington, TX
Aug 23, 2011
#3
  • Aug 23, 2011
  • #3
Check your plugs? Maybe fouling on start up?
 

Rick 91GT

Mustang Master
Nov 29, 1999
9,692
95
99
PA
Aug 23, 2011
#4
  • Aug 23, 2011
  • #4
Soon you'll have the real cam sound
 

Rick 91GT

Mustang Master
Nov 29, 1999
9,692
95
99
PA
Aug 23, 2011
#5
  • Aug 23, 2011
  • #5
Did the intake trade go through?
 

JungleJoe

I was like well chit..Im missing something
Jul 25, 2011
184
7
18
Mo.
Aug 24, 2011
#6
  • Aug 24, 2011
  • #6
Put plugs in it 3 weeks ago, still look brand new!....LITTERALLY But thanks for info. . .

LOL@Rick...... yea, but kinda wanted to get this idle situation under control....2 different "tuners" said that its in the idel circuit, Im like really? LOL but they are saying it has to be tuned... I dont know about all that, one of the tuners is a very good friend of mine, so its not like he is just saying that. I havent had the time to get my intake off, I have been in contact though with the dude.....

If nothing else, I will need to get a smaller fitting for that 70mm TB
 

Burlyirishdude

New Member
Dec 28, 2009
37
0
0
Aug 25, 2011
#7
  • Aug 25, 2011
  • #7
May sound stupid but check the rubber tubing connecting your fuel pump to the fuel lines. (in tank) Pain in the ass - but it almost sounds like there's a fuel shortage. Hear how it almost just dies out after hitting 2k rpms on the turn over. The cam sounds like it's looping funny b/c no gas.

I had a stutter on my car for about 2 months until i had a horrible backfire on the freeway scared me ****less. After 2 days of tooling through I dropped tank and wouldn't you know - - i overtightened the clamp and caused it to be sucking air and fuel in IN-TANK. As soon as i backed it off and re attached it problem went away and my idle calmed down.
 

JungleJoe

I was like well chit..Im missing something
Jul 25, 2011
184
7
18
Mo.
Aug 25, 2011
#8
  • Aug 25, 2011
  • #8
Well,I'll look in it hear real soon.... tearing the whole car apart. Thanks for the info though!
I know what your saying,I hear how the pump is acting funny too, I thought it might have something to do with the Underdrive pulley, but I dont know yet...
What ever it is,once it clears up, runs like new money...
 
You must log in or register to reply here.

Similar threads

Distributor installed wrong
  • djj62478
  • Jun 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
212
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
S
1998 Mustang Gt Rattling sound, cannot locate. Video included
  • studerman1
  • Mar 31, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
249
1996 - 2004 SN95 Mustang -General/Talk- Apr 1, 2026
studerman1
S
Suspension End link replacement size
  • Teen'93stang5.0
  • May 12, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
156
Fox 5.0 Mustang Tech May 20, 2026
Teen'93stang5.0
K
Resolved Need some assistance. Holley Terminator X alongside H/C/I. Very rough/inconsistent idle
  • karhoot
  • Jun 6, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
101
Fox 5.0 Mustang Tech Jun 6, 2026
karhoot
K
Need Some Dyno Video File Sizes
  • Noobz347
  • Jan 17, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
308
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 20, 2025
TOOLOW91
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?