VT Stage 1 or Comp 262?? Need help and specs!

[4.6LPoppy]

2 different companies. NOT the same cams. I am JIm that used to work for VT Engines and have started my own place now to continue to serve the mustang community. I designed all the cams for VT Engines so I have those grinds available. Obviously they will now be known as CMS grinds, but they are the original and popular VT grinds that I developed.

OK, Jim. You answered me on another site about a cam question. Do YOU or VTCompEng have what was(is) called the VTSTG2SC and VTSTG3SC blower cams? They list those presently. I need cams soon! What are the specs on your "Stage II and III blower cams. Their 224/236, .540/.505 112* (Stage II) cam seems to have too low a LSA to be a blower cam. Help me. Do you only custom grind. Thanks. PM if you need to or answer here for everyone.

 

[4.6LPoppy]

Tim is the man for tuning and he will get you a great mailorder tune for my cams.

Thanks again!

OK. I'm confused. So, Cushman Motorsports is doing the custom cams for Tim at MPH?

 

[CobraRed_96_GT]

OK. I'm confused. So, Cushman Motorsports is doing the custom cams for Tim at MPH?

Tim can grind his own custom cams, Jim was just recommending MPH to do the tune for the car's ecu after cams since Tim has dealt with so many cars with that cam and his tunes are spot on regardless
Cushman is it's own company apart from any others

 

[4.6LPoppy]

Tim can grind his own custom cams, Jim was just recommending MPH to do the tune for the car's ecu after cams since Tim has dealt with so many cars with that cam and his tunes are spot on regardless
Cushman is it's own company apart from any others

Gotcha! Thanks.

 

[COramprat]

I've cleaned this up to keep the tech and borderline tech posts intact. Further VT/Cushman discussion can be found here.

http://gt500.drive9.com/~snforums/showthread.php?t=735767