• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Wanted: Traction at the track

  • Thread starter Thread starter Pops Fun
  • Start date Start date Oct 26, 2006

Pops Fun

10 Year Member
Feb 15, 2003
961
14
59
Cincinnati, Ohio
Oct 26, 2006
#1
  • Oct 26, 2006
  • #1
I would like to improve my traction at the drag strip by doing some suspension upgrades over the winter. I have 500rwhp and I want to put to the ground.
I have upper and lower control arms and sub frame connectors. I’m looking for opinions on what to do.

My thoughts were either Adjustable shocks for weight x-fer or a K-member for less front-end weight. Suggestions please

Steve
 

JJ95GTID

Active Member
Sep 22, 2003
1,141
4
49
Phoenix, AZ
Oct 26, 2006
#2
  • Oct 26, 2006
  • #2
http://store.summitracing.com/partd...400272+4294908331+4294908282+115&autoview=sku


I installed these along with FRPP UCAs this last spring. Wheel hop is eliminated. They hook up really good. Side to side movement really tightened up. And, since the control arm mounting point at the axle is moved down you get additional lowering in the rear.

Having Strange 10way adjustables is really sweet. I have had no troubles with my suspension setup.
 

ProKiller

Founding Member
Apr 26, 2002
3,064
15
78
PA
Oct 26, 2006
#3
  • Oct 26, 2006
  • #3
what LCA/UCA do you have? i would look into springs/shocks/struts.
 

Killercanary

The car that set the bar.
Founding Member
Nov 29, 1999
5,676
1
76
Altoona, PA
Oct 26, 2006
#4
  • Oct 26, 2006
  • #4
I can barely read your post, please post in another color. I use the dark planet setting and your text is virtually the same color as the background.


As was asked, what specific control arms do you have now? What tires are you running? What size are they? What is it doing now on the launch?
 

Killercanary

The car that set the bar.
Founding Member
Nov 29, 1999
5,676
1
76
Altoona, PA
Oct 26, 2006
#5
  • Oct 26, 2006
  • #5
JJ95GTID said:
http://store.summitracing.com/partd...400272+4294908331+4294908282+115&autoview=sku
Click to expand...

Those work, but they put extreme pressur eon the torque boxes. By lowering the mouting point of the control arm the car will plant the tires HARD and actually lift the car on launch.
 

JJ95GTID

Active Member
Sep 22, 2003
1,141
4
49
Phoenix, AZ
Oct 26, 2006
#6
  • Oct 26, 2006
  • #6
Killercanary said:
Those work, but they put extreme pressur eon the torque boxes. By lowering the mouting point of the control arm the car will plant the tires HARD and actually lift the car on launch.
Click to expand...

Yep, they work like that. And the feel at launch is KILLER
 

ProKiller

Founding Member
Apr 26, 2002
3,064
15
78
PA
Oct 26, 2006
#7
  • Oct 26, 2006
  • #7
if your doing those, i would reinforce the torque boxes. i've heard good things about the battle boxes from ...... can't the think of the name of the company now
 

donkey_punch

New Member
Jan 16, 2004
565
0
0
northern****ingjersey
Oct 26, 2006
#8
  • Oct 26, 2006
  • #8
ProKiller said:
if your doing those, i would reinforce the torque boxes. i've heard good things about the battle boxes from ...... can't the think of the name of the company now
Click to expand...

Wild Rides?
 

ProKiller

Founding Member
Apr 26, 2002
3,064
15
78
PA
Oct 26, 2006
#9
  • Oct 26, 2006
  • #9
donkey_punch said:
Wild Rides?
Click to expand...
dat's it!
 

Pops Fun

10 Year Member
Feb 15, 2003
961
14
59
Cincinnati, Ohio
Oct 26, 2006
#10
  • Oct 26, 2006
  • #10
Killercanary said:
I can barely read your post, please post in another color. I use the dark planet setting and your text is virtually the same color as the background.
As was asked, what specific control arms do you have now? What tires are you running? What size are they? What is it doing now on the launch?
Click to expand...

Hi
I have HPM control arms. Mega-bite Jr. lowers and Mega-bite upper control arms.


 

Pops Fun

10 Year Member
Feb 15, 2003
961
14
59
Cincinnati, Ohio
Oct 26, 2006
#11
  • Oct 26, 2006
  • #11
Killercanary said:
I can barely read your post, please post in another color. I use the dark planet setting and your text is virtually the same color as the background.

As was asked, what specific control arms do you have now? What tires are you running? What size are they? What is it doing now on the launch?
Click to expand...
Hi
Hopefully you can read my post now.. I have HPM Performance mega-bite uppers and lowers. I have 325x50x15 BFG Drag radials. On launch Iam going sideways just a little and lose traction. Here is a link to my last slip.

Steve
 

2000 blown conv

New Member
Apr 5, 2005
61
0
0
Ontario Canada
Oct 26, 2006
#12
  • Oct 26, 2006
  • #12
I have adjustable chromoly uppers and lower control arms in the back, hime joints..along with 10 way adjustable strange coil overs with chromoly anti roll bar....and competition engineering 90/10's struts in the front.....driving a 5sp and ripping off 1.50. 60's every day of the week...with 485 rwhp..
 

Pops Fun

10 Year Member
Feb 15, 2003
961
14
59
Cincinnati, Ohio
Oct 26, 2006
#13
  • Oct 26, 2006
  • #13
JJ95GTID said:
http://store.summitracing.com/partdetail.asp?autofilter=1&part=LAK%2D21900&N=700+400272+4294908331+4294908282+115&autoview=sku


I installed these along with FRPP UCAs this last spring. Wheel hop is eliminated. They hook up really good. Side to side movement really tightened up. And, since the control arm mounting point at the axle is moved down you get additional lowering in the rear.

Having Strange 10way adjustables is really sweet. I have had no troubles with my suspension setup.
Click to expand...

Hi
Do these hang down under the car? and how are they on the street?

Did you do the shocks/struts at the same time?

Steve
 

Pops Fun

10 Year Member
Feb 15, 2003
961
14
59
Cincinnati, Ohio
Oct 26, 2006
#14
  • Oct 26, 2006
  • #14
2000 blown conv said:
I have adjustable chromoly uppers and lower control arms in the back, hime joints..along with 10 way adjustable strange coil overs with chromoly anti roll bar....and competition engineering 90/10's struts in the front.....driving a 5sp and ripping off 1.50. 60's every day of the week...with 485 rwhp..
Click to expand...

Nice are you running slicks or DR's.
 

JJ95GTID

Active Member
Sep 22, 2003
1,141
4
49
Phoenix, AZ
Oct 26, 2006
#15
  • Oct 26, 2006
  • #15
Pops Fun said:
Hi
Do these hang down under the car? and how are they on the street?

Did you do the shocks/struts at the same time?

Steve
Click to expand...

If you are asking about clearence from the LCAs then its not a problem. My X-pipe is the only thing that ever hits. These LCAs are fine on the street. Much better than stock.

Yes, I installed the 'B' springs, shocks/struts, CC plates, UCAs, and LCAs all at the same time. I was gonna install a panhard bar as well but after driving around with the new setup I decided the car was good without it.
 

JJ95GTID

Active Member
Sep 22, 2003
1,141
4
49
Phoenix, AZ
Oct 27, 2006
#16
  • Oct 27, 2006
  • #16
Forgot to mention that I removed the quad shocks and brackets when I did the rest of the suspension upgrades.
 

divit250r

Member
Mar 31, 2005
314
0
16
Columbia City, IN
Oct 27, 2006
#17
  • Oct 27, 2006
  • #17
Pops Fun said:
Hi
Hopefully you can read my post now.. I have HPM Performance mega-bite uppers and lowers. I have 325x50x15 BFG Drag radials. On launch Iam going sideways just a little and lose traction. Here is a link to my last slip.

Steve
Click to expand...

How are you launching? What RPM and how do you let the clutch out? I found that any form of dumping only lights up the drag radials, and I'm down probably 200-225 HP from you. lol

Scott
 

Pops Fun

10 Year Member
Feb 15, 2003
961
14
59
Cincinnati, Ohio
Oct 28, 2006
#18
  • Oct 28, 2006
  • #18
2000 blown conv said:
I have adjustable chromoly uppers and lower control arms in the back, hime joints..along with 10 way adjustable strange coil overs with chromoly anti roll bar....and competition engineering 90/10's struts in the front.....driving a 5sp and ripping off 1.50. 60's every day of the week...with 485 rwhp..
Click to expand...

Hi
Sounds like what I want.

Steve
 

SVTCobra306

New Member
Oct 22, 2005
170
1
0
Ft. Bragg, NC
Oct 28, 2006
#19
  • Oct 28, 2006
  • #19
HPM Mega-bite lowers and steeda double adjustable uppers. No wheelhop, no quads, BFG Drag Radials at 17 PSI that day.. Note how the rear lifts almost as much as the front

 

Attachments

  • img15852zc8.webp
    2.8 KB · Views: 151
You must log in or register to reply here.

Similar threads

Suspension Harsh Ride
  • PonyGTrider
  • Mar 20, 2026
  • Fox 5.0 Mustang Tech
  • 2 3 4
Replies
62
Views
3K
Fox 5.0 Mustang Tech Apr 11, 2026
Noobz347
S
Fox Another try for the European guy to get his first Fox
  • Schargedfox
  • Aug 3, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
393
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 4, 2026
DadLife0724
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
506
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
What's your tow rig?
  • LILCBRA
  • May 31, 2026
  • Other Auto Tech
Replies
9
Views
500
Other Auto Tech Oct 23, 2026
JH96GT
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
463
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?