• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Weird problem, Can you help?

  • Thread starter Thread starter Black1987Stang
  • Start date Start date Dec 13, 2005

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Dec 13, 2005
#1
  • Dec 13, 2005
  • #1
Since I put in my lifters my cars been misfiring, i got it 80% better. I had found one wire had burnt on a header and was sparking and the msd coil was sparking from the square metal winding to itself. I got a new stock coil and fixed the sparking problem on the header which helped alot. Now it only misfires under a load, revs fine without misfiring in neutral but as soon as i go to take off and drive it feels like its running on 7 cylinders. What does everyone think it is the wires or plugs? None of the plugs are wet and pretty much all evenly colored. I had taken the plugs out so i could turn the motor over to set my rockers. Weird thing is it was fine before I did the lifters HELP Please I dont have the money for new wires for them not to fix it. BTW all the wires had under 2,800 ohms of resistance
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Dec 13, 2005
#2
  • Dec 13, 2005
  • #2
ANYONE? Please...
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Dec 13, 2005
#3
  • Dec 13, 2005
  • #3
Have you tripple checked your firing order to be 100% positive that you don't have a plug wire crossed? It's a common problem (I do it once in a while)
 

shttygtstang

New Member
Jun 2, 2004
978
0
0
Dec 13, 2005
#4
  • Dec 13, 2005
  • #4
what size push rod you you using. What style rockers ?
pedestal or stud? Hows timing? Sounds like a timing issue
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Dec 13, 2005
#5
  • Dec 13, 2005
  • #5
shttygtstang said:
what size push rod you you using. What style rockers ?
pedestal or stud? Hows timing? Sounds like a timing issue
Click to expand...


Ive triple checked my firing order and its perfect. I forget what pushrods, i just remember theyre Comp hardedn ones, and Ford Racing 1.6 rockers. Its not that though because I drove it for 4 months like that without any misifing and just started to do it after i put it together from putting in the lifters. The plug gap is at .054 where is where its always been at and I have a msd 6al and i tried disconnecting it and that wasnt it. Its not timing since I can feel its coming from one cylinder not all of them. I no someone has the answer for when its fine unloaded but misifires under a load
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Dec 13, 2005
#6
  • Dec 13, 2005
  • #6
Cylinder balance test:
Warm the car's engine up to normal operating temperature. Use a jumper wire or paper clip to put the computer into test mode. Start the engine and let it go through the normal diagnostic tests, then quickly press the throttle to the floor. The engine RPM should exceed 2500 RPM's for a brief second. The engine RPM's will increase to about 1450-1600 RPM and hold steady. The engine will shut off power to each injector, one at a time. When it has sequenced through all 8 injectors, it will flash 99 for everything OK, or the number of the failing cylinder such as 22 for cylinder #2. Quickly pressing the throttle again up to 2500 RPM’s will cause the test to re-run with smaller qualifying figures. Do it a third time, and if the same cylinder shows up, the cylinder is weak and isn’t putting out power like it should. See the Chilton’s Shop manual for the complete test procedure

Here's the link to dump the computer codes with only a jumper wire or paper clip and the check engine light, or test light or voltmeter. I’ve used it for years, and it works great.

See http://www.troublecodes.net/Ford/
OR
See http://www.dalidesign.com/hbook/eectest.html for more descriptive help
OR
See http://www.mustangworks.com/articles/electronics/eec-iv_codes.html

For those who are intimidated by all the wires & connections, see http://www.actron.com/product_detail.php?pid=16153 for what a typical hand scanner looks like. Normal retail price is about $30 or so at Walmart.
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Dec 13, 2005
#7
  • Dec 13, 2005
  • #7
Thanks Jrichker, I did that and I got 8 twice but i only ran the test once. So then #8 cylinder is having the misfire i assume. Ill try doing the test a 2nd and 3rd time and see what it comes up with.

BTW when i activate the 2nd and 3rd test should i floor it for a brief second or just give it enough gas to go over 2,5000rpm?
 
You must log in or register to reply here.

Similar threads

K
Resolved Weird sound coming from a freshly rebuilt 5.0L
  • karhoot
  • Jun 24, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
397
Fox 5.0 Mustang Tech Jun 27, 2026
Mac131
Engine Hiccup at full throttle
  • keel
  • Jun 2, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
31
Views
1K
Fox 5.0 Mustang Tech Jul 30, 2026
keel
A
Check Engine codes jumping around
  • azactor
  • Jan 9, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
301
1996 - 2004 SN95 Mustang -General/Talk- Sep 24, 2026
DadLife0724
M
Help! 2003 GT misfire when hot
  • Modular03
  • Feb 10, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
620
SN95 4.6L Mustang Tech Feb 13, 2026
Mustang5L5
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
518
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?