• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

WEIRD vaccum issues!!!????

  • Thread starter Thread starter UnderdogGN
  • Start date Start date Jul 13, 2007
U

UnderdogGN

New Member
May 7, 2006
74
0
0
Jul 13, 2007
#1
  • Jul 13, 2007
  • #1
hey guys, im having some weird timing and vaccum problems with my car. First of all let me just say my car has been running/driving awesome for a long while now. Good throttle response and no stumbling or anything. So i decided to change my PCV valve the other day and come to find out the old PCV valve was not even inside the grommet where it goes! The hose attaching to it was too short so it would go in the hole. Also while i was back behind the intake looking around i noticed one of the vaccum ports on the intake had nothing attached to it. Ive been hearing that leak but could never find it. So i got the PCV all straightened out and capped the vaccum leak. Now my car will not idle at all! Up and down RPM's cause it to die. As soon as i uncapped the port to make it leak it runs awesome again! Ive never heard of a vacuum leak making a car run and idle better than without a vacuum leak!?!?
any ideas guys?????
thanks in advance and sorry for the length!
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 13, 2007
#2
  • Jul 13, 2007
  • #2
A bad IAC can be crutched by introducing a small vac leak. Check out your IAC. You might also have to reset the idle (someone probably screwed with it before, during or after the vac leak).

See Jrichker's idle surge sticky for tips and how-to's with cleaning the IAC, checking the idle setting, etc.

Good luck.
 
U

UnderdogGN

New Member
May 7, 2006
74
0
0
Jul 14, 2007
#3
  • Jul 14, 2007
  • #3
thanks alot man i will check out the IAC valve and read up in the idle surge thread
 
You must log in or register to reply here.

Similar threads

K
Resolved Need some assistance. Holley Terminator X alongside H/C/I. Very rough/inconsistent idle
  • karhoot
  • Jun 6, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
238
Fox 5.0 Mustang Tech Jun 6, 2026
karhoot
K
T
Fuel P0193 on a 2003 3.8 v6
  • Treemaster5000
  • Aug 18, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
126
SN95 V6 Mustang Tech Aug 18, 2026
Treemaster5000
T
L
Engine 85 GT Excessive Idle
  • lutzkecj
  • Sep 18, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
376
Fox 5.0 Mustang Tech Sep 21, 2026
86HO5.0
8
N
Edelbrock 1405 Setup
  • nathantaylor200
  • Nov 4, 2025
  • Classic Mustang Specific Tech
Replies
3
Views
352
Classic Mustang Specific Tech Nov 5, 2025
nathantaylor200
N
C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
1K
Fox 5.0 Mustang Tech Jul 24, 2026
alutwon
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?