• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

What are the best Head Gaskets

  • Thread starter Thread starter 1Slow90coupe
  • Start date Start date May 6, 2006
1

1Slow90coupe

New Member
Oct 18, 2005
145
0
0
May 6, 2006
#1
  • May 6, 2006
  • #1
What are the best you can buy? I am not sure that I want to O-Ring the heads and block so what do I buy?
 

Blk91stang

Member
Jan 3, 2003
607
0
16
North Brunswick, NJ
May 6, 2006
#2
  • May 6, 2006
  • #2
I'd have to go with Cometic are one of the best money can buy.
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
May 6, 2006
#3
  • May 6, 2006
  • #3
If you're very conscientious about your tune then you can install come Cometic gaskets. Be advised: Cometics do not "give". If you get detonation then the next weakest link in the chain will pay the price (valves, seals, pistons, bearings, etc). Otherwise... regular ole Felpros will do very well.
 

mattmcdan

Member
Apr 19, 2006
176
0
19
Okeechobee, Florida
May 6, 2006
#4
  • May 6, 2006
  • #4
Corteco head gaskets are the bomb, You can get them at Carquest, A head set runs $75. I will also state that corteco gaskets are coated with sealer to help seal up that 302. I use them in my 10 sec 65 nova 496ci (ya I know boooo on chevy, here comes the flame)
 

droptop93

Founding Member
Mar 6, 2002
1,497
0
36
Lake Mary, Florida
May 7, 2006
#5
  • May 7, 2006
  • #5
unless your running lots o' boost, or spraying lots o' gas...i don't think cometics are necessary.

I've run 20psi as well as a 200shot (not at the same time, mind you) on a pair of felpro 9333-pt1's without a hitch. Just my .02
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
May 7, 2006
#6
  • May 7, 2006
  • #6
droptop93 said:
unless your running lots o' boost, or spraying lots o' gas...i don't think cometics are necessary.

I've run 20psi as well as a 200shot (not at the same time, mind you) on a pair of felpro 9333-pt1's without a hitch. Just my .02
Click to expand...

Not to mention that there's also additional machine work required on both the head and block deck surface for Cometics. Neglected to mention that in my first post.
 
You must log in or register to reply here.

Similar threads

Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
375
Fox 5.0 Mustang Tech Monday at 12:17 PM
PonyGTrider
Engine Felpro 9333 pt1 (with 8psi boost)
  • JD1964
  • Jan 14, 2026
  • Fox 5.0 Mustang Tech
Replies
18
Views
816
Fox 5.0 Mustang Tech Feb 1, 2026
Qtrhrse23
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
983
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
154
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
Engine Catch Can or not?
  • R82148V
  • Mar 4, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
387
Fox 5.0 Mustang Tech Mar 6, 2026
ctandc
C
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?