Roush What blower is on the 2003 saleen?

[03s281sc]

What blower comes on the 2003 saleens? Also, does anyone know who makes it?

 

[sstrayer]

What blower comes on the 2003 saleens? Also, does anyone know who makes it?

Should be the whipple 1.6 liter aka the 1600ax. There's a few places that sell the head unit (superchargersonline.com)

Shaun

 

[00-Saleen]

Whipple Twin Screw Supercharger 1600AX

 

[03s281sc]

is it the series IV?

 

[sstrayer]

is it the series IV?

That is correct, I think this is the correct timeline for the S281:

Series 1/2 = Eaton M90 Roots (99-02)
Series 4 = Whipple 1600ax (03-04)
Series 5 = Whipple 2300ax (281e only)

Shaun

 

[00-Saleen]

That is correct, I think this is the correct timeline for the S281:

Series 1/2 = Eaton M90 Roots (99-02)
Series 4 = Whipple 1600ax (03-04)
Series 5 = Whipple 2300ax (281e only)

Shaun

Yep This is Correct.

 

[whosdady]

So the S4 is a 1.6 liter and the S5 is a 2.3 liter. What is the S2? I want to say it is a 1.3 liter but I can't remember.

 

[00-Saleen]

Check Eatons Site for Displacement on the series 1 and 2.

 

[Head Paneer]

So the S4 is a 1.6 liter and the S5 is a 2.3 liter. What is the S2? I want to say it is a 1.3 liter but I can't remember.

The Eaton M90s used in the Series Is and IIs were 90 cubic inches, which converts to 1.475 L.

 

[whosdady]

The Eaton M90s used in the Series Is and IIs were 90 cubic inches, which converts to 1.475 L.

Thank you HP, I didn't see that information on their website. I wonder how many liters my ported S2 is? Since the eaton 110 is just over 1.8 liters, I would guess my ported blower is close to 1.5 liters or more.

 

[00-Saleen]

God that Eaton is Small. Im surprised someone has squezzed 350RWHp plus out of it.

 

[whosdady]

I guess everything is relative. 1.475L isn't much smaller than 1.6L. But compared to 2.3L it is pretty small...

By the way, there are several guys pushing over 350rwhp with the S2 blower. The highest number I have seem is 460rwhp. I'm hoping that I wont be too far behind that soon...

 

[03s281sc]

has anyone heard of a eaton m112. I emailed billetflow to see if they made a pulley for the series IV or whipple 1600ax and he said "If the supercharger is an Eaton M112 then the answer is yes, I make them..

Hope this helps"

???????

 

[00s281sc368]

The M112 is what comes on 03-04 cobras. It won't fit on GT blocks for which only M90 has been used.

 

[00-Saleen]

Reichard Racing makes pulleys for the Series IV E-mail them. There 150$ .