I have a 1991 lx f-cam 100hp dry, GT40 4;10 gears, gos 12.40 and the clutch is slipping. This is a street car with AC and all so i dont want anything crazy. Any help would be great.
Centerforce Dual Friction or a SPEC also has gotten good reviews on here. SPEC has various stages, so I'm not sure which stage you'd need, but maybe like a stage 2.
I'm very happy with the Hays in my car.
Wife likes it better than the stocker it replaced.
Chatter'd some on break in, but is very smooth and modulatable after a few street miles... few trips to the office and back.
Friend has gone 1.3 60' and 10.3's@130 with the same clutch.
I would also consider a McLeod... and never a spec.
I've had CF-df, Spec II, KC and out of the three I like the CF best.
The Cobra had too much heavy pedal for my likes, but was cheap and grabbed well on my 12 second ride.
The Spec just felt good, no complaints.
The CF has a factory pedal effort and that is the reason I liked it ...
The only complaint would be once in a while on cold starts you can hear the weights move/clank for a second when you release the clutch.
I heard the McLeod is better yet, so, who knows except the guy that has used one.
I've had CF-df, Spec II, KC and out of the three I like the CF best.
The Cobra had too much heavy pedal for my likes, but was cheap and grabbed well on my 12 second ride.
The Spec just felt good, no complaints.
The CF has a factory pedal effort and that is the reason I liked it ...
The only complaint would be once in a while on cold starts you can hear the weights move/clank for a second when you release the clutch.
I heard the McLeod is better yet, so, who knows except the guy that has used one.
Well I guess I am the poster child for Clutch Destruction. I destroyed 3 CF DF in my car with the stock motor in it. I have also taken down two spec stage 3's. The latest one seems to be holding pretty well but it's still pretty soon to tell.
Yes I am hard on my cars at the track and I know a lot of people are not. If it's something that your not doing 5500 rpm launches with at the track I am sure the CF would work just fine.
Well I guess I am the poster child for Clutch Destruction. I destroyed 3 CF DF in my car with the stock motor in it. I have also taken down two spec stage 3's. The latest one seems to be holding pretty well but it's still pretty soon to tell.
Yes I am hard on my cars at the track and I know a lot of people are not. If it's something that your not doing 5500 rpm launches with at the track I am sure the CF would work just fine.
Just ordered a King Cobra clutch kit from UPR about five minutes ago. My front tranny seal has been slinging fluid all over inside the bellhousing the past few months, and it's finally glazed the clutch disc and flywheel to the point where it's starting to slip under more than 50% throttle in 5th or 4th.
UPR seems to have about the best price on the KC kit, far as I could find. $169 plus shipping. Never really heard anything bad about them from anyone for most setups (stock, mild, and some wild). The FRPP Heavy Duty clutch I had in my prior '89 notch held up great (although it did give my left leg a heckuva workout in traffic) - the KC is the same clutch, basically, just not *quite* as brutal on your clutch-leg muscles (but still firmer than stock). The Centerforce units might have a far lighter pedal feel, but I didn't feel like paying twice as much for that one feature.
Now I just gotta decide whether I wanna try to tackle changing it, myself, or if I should pay some other monkey to deal with the mess.