What does this go to??????

trickstang94

New Member

Nov 17, 2004

80

0

0

CA

May 29, 2005

#1

• May 29, 2005

• #1

Well today I re-routed (hid) all my wires in the engine. It wasnt hard at all. I didnt even remove the bumper or the fenders, just the inner fender wells. Anyway, as I was disconnecting everything I notice, on the passenger side, a hard tube inside the passenger side fender that routes somewhere into the engine area. Here is a pic. Does anyone know?

 

Attachments

• DSC00158.webp

  36.4 KB · Views: 178

trickstang94

New Member

Nov 17, 2004

80

0

0

CA

May 29, 2005

#2

• May 29, 2005

• #2

anyone????

 

2L8ULUZ2

Will kiss Moderator ass for title

Founding Member

Sep 24, 2000

3,033

14

99

WNC

May 29, 2005

#3

• May 29, 2005

• #3

I think that is part of the ac system. I do not have it on my car anymore so I cant go look at it but if I remember correctly I took it off when I removed my ac. Is it connected to anything under the car?

 

trickstang94

New Member

Nov 17, 2004

80

0

0

CA

May 29, 2005

#4

• May 29, 2005

• #4

A buddy of mine has his a/c still hooked up and he said he has that same thing in the same spot, but doesnt know either.

 

1105

I AM the random post master...bow down

May 3, 2003

3,841

0

0

Daytona Bch, FL

May 29, 2005

#5

• May 29, 2005

• #5

I think its a vent for the gas tank I just pulled the plastic part off and stuck the rubber part somewhere out of the way.

 

RIO5.0

15 Year Member

Feb 16, 2001

6,892

8

128

N.H.

May 29, 2005

#6

• May 29, 2005

• #6

Being what appears to be a metal line, I would think AC?....just thinking here...Isn't there 2 metal lines that feed the AC condenser in front of the radiator on the pass side??? does it feed one of them???

 

trickstang94

New Member

Nov 17, 2004

80

0

0

CA

May 29, 2005

#7

• May 29, 2005

• #7

Im pretty sure its not an a/c part. Maybe im wrong.

 

1105

I AM the random post master...bow down

May 3, 2003

3,841

0

0

Daytona Bch, FL

May 29, 2005

#8

• May 29, 2005

• #8

from that pic if looks plastic and i do believe it stops right after that clip. I think the AC lines come from above and the drivers side... Dont remember taking off any AC lines from down in that area.

 

RIO5.0

15 Year Member

Feb 16, 2001

6,892

8

128

N.H.

May 29, 2005

#9

• May 29, 2005

• #9

I just went out and checked mine...Your right...Not AC....As Zach said, it ends right at the clip...
Maybe it is fuel...the charcoal can is up in that area.....I didn't bother to try and sniff it either....

 

1105

I AM the random post master...bow down

May 3, 2003

3,841

0

0

Daytona Bch, FL

May 29, 2005

#10

• May 29, 2005

• #10

RIO5.0 said:

I just went out and checked mine...Your right...Not AC....As Zach said, it ends right at the clip...
Maybe it is fuel...the charcoal can is up in that area.....I didn't bother to try and sniff it either....

Click to expand...

no faith

you could try a lighter right infront of it too... I swear it'll be safer than trying to sniff it

 

R

rockin_rick

Member

Oct 9, 2003

968

1

17

May 29, 2005

#11

• May 29, 2005

• #11

It is the vent for the canister. It just ends there and doesn't connect to anything in the engine compartment.

Rick

 

trickstang94

New Member

Nov 17, 2004

80

0

0

CA

May 29, 2005

#12

• May 29, 2005

• #12

This may be a stupid question but what canister????

 

RIO5.0

15 Year Member

Feb 16, 2001

6,892

8

128

N.H.

May 29, 2005

#13

• May 29, 2005

• #13

1105 said:

no faith

you could try a lighter right infront of it too... I swear it'll be safer than trying to sniff it

Click to expand...

Chit...I had my lighter with me to... :damnit: Good thinking...

I know a few guys have posted pics with the fenders off and you can see all those lines....The Purge soleniod from the engine feeds to a charcoal cannister in the fender...

 

R

rockin_rick

Member

Oct 9, 2003

968

1

17

May 30, 2005

#14

• May 30, 2005

• #14

trickstang94 said:

This may be a stupid question but what canister????

Click to expand...

The canister absorbs and temporarially stores fuel vapors from the fuel tank. Then, during certain engine operating conditions, it opens the canister purge valve and draws those vapors out of the canister and into the intake manifold to be burnt. It is a emission system that prevents fuel vapors from entering the atmosphere.

Rick

 

R

rockin_rick

Member

Oct 9, 2003

968

1

17

May 30, 2005

#15

• May 30, 2005

• #15

This pic is the canister. That hard hose (the main thread issue) connects to the largest 'soft' hose shown in the pic. It's the one that tee's off into 2 connections to the canister top. It says "VAPOR" on it.

The ribbed "soft" line (with lettering that can be seen) that is about 6" long and connects into the hard line shown (with the paper label wrapping around it), connects to the fuel tank. This is where the vapors come into the canister.

And finally, the other soft line that is "behind" the others connects to the canister purge valve, and ultimately, the intake manifold.

Rick

 

Attachments

• canister2.webp

  47 KB · Views: 113

Gibbo97

Founding Member

Apr 20, 2001

92

0

7

Macon, GA

May 30, 2005

#16

• May 30, 2005

• #16

here's a shot of the cannister where it is mounted:

View attachment 513235

 

trickstang94

New Member

Nov 17, 2004

80

0

0

CA

May 30, 2005

#17

• May 30, 2005

• #17

So the line that I originally talked about is just a drain line???

 

1105

I AM the random post master...bow down

May 3, 2003

3,841

0

0

Daytona Bch, FL

May 30, 2005

#18

• May 30, 2005

• #18

If its what I think it is, its just a tube to vent the gas tank so no pressure will build up in it.