Guys, Im picking up a car next week. Planning on an On3 turbo. Here's the combo so far, what changes do you recomend besides bigger injectors and maf and higher rear gearing? No automatic suggestions please! This wil be just a street car/ weekend toy, not drag racer. Will plan on keeping boost level around 8-10 due to the block.
Here the info....
dss level 10 block that is .040 over actually making it 333 in. 9.6:1. It has a dss 331 sx rotating assembly w/ the main support, all forged, it has a mild crane 2020 cam. It has edelbrock RPM heads with port and bowl work they have ferrera 2.05 int. and 1.60 edel. int. It has 1.6 harland sharp rollers, comp 6.050 pushrods ,new F.R. lifters, new comp. timing set, new f.r. h20 pump, trick flow track heat int w/ 70mm. T.B., moroso kickout 8 qt. pan,pro-m 75mm maf. bbk 1+5/8 long tubes 2.5 h-pipe and mac 3in. produmps. Alum. drive shaft. 373 rear
Thanks for your help
Here the info....
dss level 10 block that is .040 over actually making it 333 in. 9.6:1. It has a dss 331 sx rotating assembly w/ the main support, all forged, it has a mild crane 2020 cam. It has edelbrock RPM heads with port and bowl work they have ferrera 2.05 int. and 1.60 edel. int. It has 1.6 harland sharp rollers, comp 6.050 pushrods ,new F.R. lifters, new comp. timing set, new f.r. h20 pump, trick flow track heat int w/ 70mm. T.B., moroso kickout 8 qt. pan,pro-m 75mm maf. bbk 1+5/8 long tubes 2.5 h-pipe and mac 3in. produmps. Alum. drive shaft. 373 rear
Thanks for your help