What fuel pump for this combo?

Hey Experts (or guys that just know more than me):
I searched the threads and didn't really find anything to answer this question. For my summer project, I'm hoping to rebuild my '89 ex-GSP coupe and turn it into a nice and possible daily driver. I definitely want it to sound good, look good, and run good, but I'm not too too worried about any track times with this combo, considering some of my choices may take away form torque. Generally, my plans are:

306, Trickflow TW heads, possibly F303 cam (.512 lift), BBK shorties, Victor 5.0 upper and lower EFI intake (this is where I'll lose my torque, but I like short runner intakes), 70mm TB, CAI, 73mm MAF, and was planning on 24# injectors. Ignition will include MSD 6A box and Performance Distributors' kit to upgrade wires, stock distr., etc. What size fuel pump will I need? Will the 24# injectors be sufficient with this combo (8.7:1 or 9:1 compression)? Also, will a A/F ratio meter be accurate enough when tuning the fuel psi with an adjustable fuel reg.?

Thanks in advance!

-Clifton

Sorry, one more thing:
Are stock fuel rails good enough?
Thanks,
Clifton

Thanks Rick! Anyone else's opinons, thoughts, knowledge?
Compresson will be between 8.7:1 and 9.5:1!
Thanks,
Clifton

Thanks a bunch guys. I will definitely reconsider the MAF, but 73 has been used on cars running in the 10's (I'm not worried bout my et), hence they have more power than I plan to have, and the 73 is also much larger than stock, correct? 75 or 76 MAF will probably be swapped into the plans. Thanks again.
-Clifton